A B C D E F G H I J K L M N O P Q R S T U V W X Y Z _

S

S - Variable in class com.ni.vision.NIVision.HSIValue

S - Variable in class com.ni.vision.NIVision.HSLValue

S - Variable in class com.ni.vision.NIVision.HSVValue

SAFETY_OBJECTS - Static variable in class io.github.robolib.SafetyManager

The m_safety objects.

SAFETY_TIMEOUT_DEFAULT - Static variable in interface io.github.robolib.module.MotorSafety

The Constant SAFETY_TIMEOUT_DEFAULT.

SAFETY_TIMEOUT_LOOSE - Static variable in interface io.github.robolib.module.MotorSafety

The Constant SAFETY_TIMEOUT_LOOSE.

SAFETY_TIMEOUT_STRICT - Static variable in interface io.github.robolib.module.MotorSafety

The Constant SAFETY_TIMEOUT_STRICT.

SafetyManager - Class in io.github.robolib

The Class SafetyManager.

SafetyManager() - Constructor for class io.github.robolib.SafetyManager

SAMPLE_RATE - Static variable in class io.github.robolib.module.sensor.AnalogGyro

SAMPLE_RATE_TOO_HIGH - Static variable in class io.github.robolib.jni.HALUtil

SAMPLE_RATE_TOO_HIGH_MESSAGE - Static variable in class io.github.robolib.jni.HALLibrary

native declaration : AthenaJava\target\native\include\HAL\Errors.h

SAMPLES_PER_SEC - Static variable in class io.github.robolib.module.sensor.AnalogGyro

SampleScore() - Constructor for class com.ni.vision.NIVision.SampleScore

SampleScore(String, double, int) - Constructor for class com.ni.vision.NIVision.SampleScore

SampleScore(ByteBuffer, int) - Constructor for class com.ni.vision.NIVision.SampleScore

SampleScore(long, boolean) - Constructor for class com.ni.vision.NIVision.SampleScore

sampleScores - Variable in class com.ni.vision.NIVision.ClassifierReportAdvanced

sampleScores_buf - Variable in class com.ni.vision.NIVision.ClassifierReportAdvanced

saturation - Variable in class com.ni.vision.NIVision.ColorInformation

scale - Variable in class com.ni.vision.NIVision.GeometricPatternMatch

scale - Variable in class com.ni.vision.NIVision.GeometricPatternMatch2

scale - Variable in class com.ni.vision.NIVision.GeometricPatternMatch3

scale - Variable in class com.ni.vision.NIVision.InspectionAlignment

scale - Variable in class com.ni.vision.NIVision.MatchMode

scale - Variable in class com.ni.vision.NIVision.PatternMatch

ScaleBehavior - Variable in class com.ni.vision.NIVision.TransformBehaviors

scaleDependence - Variable in class com.ni.vision.NIVision.ParticleClassifierOptions

scaleMode - Variable in class com.ni.vision.NIVision.CalibrationLearnSetupInfo

scaleRange - Variable in class com.ni.vision.NIVision.MatchGeometricPatternOptions

scaleRange - Variable in class com.ni.vision.NIVision.ShapeDetectionOptions

ScalingMethod(int) - Constructor for enum com.ni.vision.NIVision.ScalingMethod

ScalingMode(int) - Constructor for enum com.ni.vision.NIVision.ScalingMode

Schedulable - Interface in io.github.robolib.command

Represents an object that can be scheduled in the scheduler.

Scheduler - Class in io.github.robolib.command

The Class Scheduler.

Scheduler() - Constructor for class io.github.robolib.command.Scheduler

Instantiates a new scheduler.

score - Variable in class com.ni.vision.NIVision.CircleMatch

score - Variable in class com.ni.vision.NIVision.EllipseMatch

score - Variable in class com.ni.vision.NIVision.GeometricPatternMatch

score - Variable in class com.ni.vision.NIVision.GeometricPatternMatch2

score - Variable in class com.ni.vision.NIVision.GeometricPatternMatch3

score - Variable in class com.ni.vision.NIVision.LineMatch

score - Variable in class com.ni.vision.NIVision.PatternMatch

score - Variable in class com.ni.vision.NIVision.RectangleMatch

score - Variable in class com.ni.vision.NIVision.ShapeReport

score - Variable in class com.ni.vision.NIVision.StraightEdge

scrollDisplayLeft() - Method in class io.github.robolib.module.LCD2004

scrollDisplayRight() - Method in class io.github.robolib.module.LCD2004

SD_TABLE - Static variable in class io.github.robolib.util.SmartDashboard

SearchArcInfo() - Constructor for class com.ni.vision.NIVision.SearchArcInfo

SearchArcInfo(NIVision.ArcInfo2, NIVision.EdgeReport2) - Constructor for class com.ni.vision.NIVision.SearchArcInfo

SearchArcInfo(ByteBuffer, int) - Constructor for class com.ni.vision.NIVision.SearchArcInfo

SearchArcInfo(long, boolean) - Constructor for class com.ni.vision.NIVision.SearchArcInfo

searchArcs - Variable in class com.ni.vision.NIVision.ConcentricRakeReport2

searchArcs_buf - Variable in class com.ni.vision.NIVision.ConcentricRakeReport2

searchAreaColor - Variable in class com.ni.vision.NIVision.ClampOverlaySettings

searchAreaColor - Variable in class com.ni.vision.NIVision.FindCircularEdgeOptions

searchAreaColor - Variable in class com.ni.vision.NIVision.FindConcentricEdgeOptions

searchAreaColor - Variable in class com.ni.vision.NIVision.FindEdgeOptions2

searchAreaColor - Variable in class com.ni.vision.NIVision.FindTransformRectOptions2

searchAreaColor - Variable in class com.ni.vision.NIVision.FindTransformRectsOptions2

SearchDirection(int) - Constructor for enum com.ni.vision.NIVision.SearchDirection

searchEdgesColor - Variable in class com.ni.vision.NIVision.FindCircularEdgeOptions

searchEdgesColor - Variable in class com.ni.vision.NIVision.FindConcentricEdgeOptions

searchEdgesColor - Variable in class com.ni.vision.NIVision.FindEdgeOptions2

searchEdgesColor - Variable in class com.ni.vision.NIVision.FindTransformRectOptions2

searchEdgesColor - Variable in class com.ni.vision.NIVision.FindTransformRectsOptions2

SearchLineInfo() - Constructor for class com.ni.vision.NIVision.SearchLineInfo

SearchLineInfo(NIVision.LineFloat, NIVision.EdgeReport2) - Constructor for class com.ni.vision.NIVision.SearchLineInfo

SearchLineInfo(ByteBuffer, int) - Constructor for class com.ni.vision.NIVision.SearchLineInfo

SearchLineInfo(long, boolean) - Constructor for class com.ni.vision.NIVision.SearchLineInfo

searchLines - Variable in class com.ni.vision.NIVision.RakeReport2

searchLines - Variable in class com.ni.vision.NIVision.SpokeReport2

searchLines - Variable in class com.ni.vision.NIVision.StraightEdgeReport2

searchLines_buf - Variable in class com.ni.vision.NIVision.RakeReport2

searchLines_buf - Variable in class com.ni.vision.NIVision.SpokeReport2

searchLines_buf - Variable in class com.ni.vision.NIVision.StraightEdgeReport2

searchLinesColor - Variable in class com.ni.vision.NIVision.FindCircularEdgeOptions

searchLinesColor - Variable in class com.ni.vision.NIVision.FindConcentricEdgeOptions

searchLinesColor - Variable in class com.ni.vision.NIVision.FindEdgeOptions2

searchLinesColor - Variable in class com.ni.vision.NIVision.FindTransformRectOptions2

searchLinesColor - Variable in class com.ni.vision.NIVision.FindTransformRectsOptions2

searchMode - Variable in class com.ni.vision.NIVision.DataMatrixOptions

searchMode - Variable in class com.ni.vision.NIVision.StraightEdgeOptions

searchStep - Variable in class com.ni.vision.NIVision.CurveParameters

searchStrategy - Variable in class com.ni.vision.NIVision.MatchPatternAdvancedOptions

SearchStrategy(int) - Constructor for enum com.ni.vision.NIVision.SearchStrategy

searchStrategySupport - Variable in class com.ni.vision.NIVision.LearnPatternAdvancedRotationOptions

secondaryAxisEnd - Variable in class com.ni.vision.NIVision.AxisReport

secondaryEdgeOptions - Variable in class com.ni.vision.NIVision.FindTransformRectsOptions2

secondDerivative - Variable in class com.ni.vision.NIVision.ExtremeReport

secondEndPoint - Variable in class com.ni.vision.NIVision.ParallelLinePairFeature

secondParallelLinePair - Variable in class com.ni.vision.NIVision.PairOfParallelLinePairsFeature

secondStartPoint - Variable in class com.ni.vision.NIVision.ParallelLinePairFeature

SegmentationDistanceLevel(int) - Constructor for enum com.ni.vision.NIVision.SegmentationDistanceLevel

segmentInfo - Variable in class com.ni.vision.NIVision.LCDReport

SegmentInfo() - Constructor for class com.ni.vision.NIVision.SegmentInfo

SegmentInfo(int, int, double, NIVision.ContourPoint) - Constructor for class com.ni.vision.NIVision.SegmentInfo

SegmentInfo(ByteBuffer, int) - Constructor for class com.ni.vision.NIVision.SegmentInfo

SegmentInfo(long, boolean) - Constructor for class com.ni.vision.NIVision.SegmentInfo

segmentInfo_buf - Variable in class com.ni.vision.NIVision.LCDReport

SelectParticleCriteria() - Constructor for class com.ni.vision.NIVision.SelectParticleCriteria

SelectParticleCriteria(NIVision.MeasurementValue, double, double) - Constructor for class com.ni.vision.NIVision.SelectParticleCriteria

SelectParticleCriteria(ByteBuffer, int) - Constructor for class com.ni.vision.NIVision.SelectParticleCriteria

SelectParticleCriteria(long, boolean) - Constructor for class com.ni.vision.NIVision.SelectParticleCriteria

send(int, byte) - Method in class io.github.robolib.module.LCD2004

send(NTConnection) - Method in class io.github.robolib.nettable.entry.NTTableEntry

Sendable - Interface in io.github.robolib.identifier

sendClientHello() - Method in class io.github.robolib.nettable.NTConnection

sendEntryAssignment(NTTableEntry) - Method in class io.github.robolib.nettable.NTConnection

sendEntryUpdate(NTTableEntry) - Method in class io.github.robolib.nettable.NTConnection

sendErrMsg(LogLevel, String) - Method in class io.github.robolib.util.log.Logger

Log an error message.

sendKeepAlive() - Method in class io.github.robolib.nettable.NTConnection

sendMessage(int, byte[], int, int) - Method in class io.github.robolib.module.actuator.CANJaguar

Send a message to the Jaguar.

sendMessage(int, byte[], int) - Method in class io.github.robolib.module.actuator.CANJaguar

Send a message to the Jaguar, non-periodically

sendMessageHeader(int) - Method in class io.github.robolib.nettable.NTConnection

sendMessageHelper(int, byte[], int, int) - Static method in class io.github.robolib.module.actuator.CANJaguar

sendMsg(LogLevel, String) - Method in class io.github.robolib.util.log.Logger

Log a message.

sendMsg(String) - Method in interface io.github.robolib.util.log.LogOutput

Sends the message to the output.

sendProtocolVersionUnsupported() - Method in class io.github.robolib.nettable.NTConnection

sendServerHello(NTConnection) - Method in class io.github.robolib.nettable.entry.NTEntryStore

Send all entries in the entry store as entry assignments in a single transaction

sendServerHelloComplete() - Method in class io.github.robolib.nettable.NTConnection

sendValue(Object, DataOutputStream) - Method in class io.github.robolib.nettable.entry.ArrayEntryType

sendValue(Object, DataOutputStream) - Method in class io.github.robolib.nettable.entry.NTEntryType

send a value over a data output stream

sendValue(DataOutputStream) - Method in class io.github.robolib.nettable.entry.NTTableEntry

Send the value of the entry over the output stream

sensitivity - Variable in class com.ni.vision.NIVision.MatchColorPatternOptions

SensorModule - Interface in io.github.robolib.module.sensor

SENSORS_LIST - Static variable in class io.github.robolib.LiveWindow

separation - Variable in class com.ni.vision.NIVision.CaliperOptions

separation - Variable in class com.ni.vision.NIVision.CaliperReport

separationDeviation - Variable in class com.ni.vision.NIVision.CaliperOptions

Serial - Class in io.github.robolib.module.iface

Driver for the RS-232 serial port on the RoboRIO.

Serial(Serial.Port, int, int, Serial.Parity, Serial.StopBits) - Constructor for class io.github.robolib.module.iface.Serial

Create an instance of a Serial Port class.

Serial.BufferMode - Enum in io.github.robolib.module.iface

Represents which type of buffer mode to use when writing to a serial port

Serial.FlowControl - Enum in io.github.robolib.module.iface

Represents what type of flow control to use for serial communication

Serial.Parity - Enum in io.github.robolib.module.iface

Represents the parity to use for serial communications

Serial.Port - Enum in io.github.robolib.module.iface

Valid ports for the serial port.

Serial.StopBits - Enum in io.github.robolib.module.iface

Represents the number of stop bits to use for Serial Communication

serialClear(byte, IntBuffer) - Static method in class io.github.robolib.jni.SerialPortJNI

serialClose(byte, IntBuffer) - Static method in class io.github.robolib.jni.SerialPortJNI

serialDisableTermination(byte, IntBuffer) - Static method in class io.github.robolib.jni.SerialPortJNI

serialEnableTermination(byte, char, IntBuffer) - Static method in class io.github.robolib.jni.SerialPortJNI

serialFlush(byte, IntBuffer) - Static method in class io.github.robolib.jni.SerialPortJNI

serialGetBytesRecieved(byte, IntBuffer) - Static method in class io.github.robolib.jni.SerialPortJNI

serialInitializePort(byte, IntBuffer) - Static method in class io.github.robolib.jni.SerialPortJNI

SerialNumberHi - Variable in class com.ni.vision.NIVision.IMAQdxCameraInformation

SerialNumberLo - Variable in class com.ni.vision.NIVision.IMAQdxCameraInformation

SerialPortJNI - Class in io.github.robolib.jni

SerialPortJNI() - Constructor for class io.github.robolib.jni.SerialPortJNI

serialRead(byte, ByteBuffer, int, IntBuffer) - Static method in class io.github.robolib.jni.SerialPortJNI

serialSetBaudRate(byte, int, IntBuffer) - Static method in class io.github.robolib.jni.SerialPortJNI

serialSetDataBits(byte, byte, IntBuffer) - Static method in class io.github.robolib.jni.SerialPortJNI

serialSetFlowControl(byte, byte, IntBuffer) - Static method in class io.github.robolib.jni.SerialPortJNI

serialSetParity(byte, byte, IntBuffer) - Static method in class io.github.robolib.jni.SerialPortJNI

serialSetReadBufferSize(byte, int, IntBuffer) - Static method in class io.github.robolib.jni.SerialPortJNI

serialSetStopBits(byte, byte, IntBuffer) - Static method in class io.github.robolib.jni.SerialPortJNI

serialSetTimeout(byte, float, IntBuffer) - Static method in class io.github.robolib.jni.SerialPortJNI

serialSetWriteBufferSize(byte, int, IntBuffer) - Static method in class io.github.robolib.jni.SerialPortJNI

serialSetWriteMode(byte, byte, IntBuffer) - Static method in class io.github.robolib.jni.SerialPortJNI

serialVersionUID - Static variable in exception com.ni.vision.VisionException

serialVersionUID - Static variable in exception io.github.robolib.lang.CANInvalidBufferException

serialVersionUID - Static variable in exception io.github.robolib.lang.CANMessageNotAllowedException

serialVersionUID - Static variable in exception io.github.robolib.lang.CANMessageNotFoundException

serialVersionUID - Static variable in exception io.github.robolib.lang.CANNotInitializedException

serialVersionUID - Static variable in exception io.github.robolib.lang.ChannelIndexException

serialVersionUID - Static variable in exception io.github.robolib.lang.ResourceAllocationException

serialVersionUID - Static variable in exception io.github.robolib.lang.RobotException

The Constant serialVersionUID.

serialVersionUID - Static variable in exception io.github.robolib.module.hid.GenericHID.InvalidAxisException

The Constant serialVersionUID.

serialVersionUID - Static variable in exception io.github.robolib.module.hid.GenericHID.InvalidButtonException

The Constant serialVersionUID.

serialVersionUID - Static variable in exception io.github.robolib.nettable.BadMessageException

serialVersionUID - Static variable in exception io.github.robolib.nettable.NetworkTableKeyNotDefined

Deprecated.

serialVersionUID - Static variable in exception io.github.robolib.nettable.WrongEntryTypeException

serialVersionUID - Static variable in exception org.json.JSONException

serialWrite(byte, ByteBuffer, int, IntBuffer) - Static method in class io.github.robolib.jni.SerialPortJNI

SERVER_HELLO_COMPLETE - Static variable in interface io.github.robolib.nettable.NTMessageType

serverHelloComplete() - Method in class io.github.robolib.nettable.NTConnectionAdapter

Servo - Class in io.github.robolib.module.actuator

Servo(PWM.PWMChannel) - Constructor for class io.github.robolib.module.actuator.Servo

SERVO_ANGLE_RANGE - Static variable in class io.github.robolib.module.actuator.Servo

SERVO_MAX_ANGLE - Static variable in class io.github.robolib.module.actuator.Servo

SERVO_MIN_ANGLE - Static variable in class io.github.robolib.module.actuator.Servo

SERVO_PWM_DEFAULT_MAX - Static variable in class io.github.robolib.module.actuator.Servo

SERVO_PWM_DEFAULT_MIN - Static variable in class io.github.robolib.module.actuator.Servo

ServoMapper - Class in io.github.robolib.util.mapper

ServoMapper() - Constructor for class io.github.robolib.util.mapper.ServoMapper

set(double) - Method in interface io.github.robolib.identifier.NumberSink

Set the value of this sink

Set(double) - Method in class io.github.robolib.jni.CanTalonSRX

set(double, byte) - Method in class io.github.robolib.module.actuator.CANJaguar

Sets the output set-point value.

set(double) - Method in class io.github.robolib.module.actuator.CANJaguar

Sets the output set-point value.

set(double) - Method in class io.github.robolib.module.actuator.CANTalon

Sets the appropriate output on the talon, depending on the mode.

set(double, byte) - Method in class io.github.robolib.module.actuator.CANTalon

Sets the output of the Talon.

set(SolenoidBase.Value) - Method in class io.github.robolib.module.actuator.DoubleSolenoid

Sets the.

set(double) - Method in class io.github.robolib.module.actuator.Servo

Set the servo position.

set(SolenoidBase.Value) - Method in class io.github.robolib.module.actuator.Solenoid

Sets the.

set(ByteBuffer, byte) - Static method in class io.github.robolib.module.actuator.SolenoidBase

Sets the.

set(SolenoidBase.Value) - Method in class io.github.robolib.module.actuator.SolenoidBase

Sets the.

set(double, byte) - Method in interface io.github.robolib.module.controller.SpeedController

Deprecated.

Replaced by SpeedController.setSpeed(double), only here for CANJaguar compatibility.

set(double) - Method in class io.github.robolib.module.iface.AnalogOutput

Set the voltage of this Analog Output

set(double) - Method in class io.github.robolib.module.iface.PWM

Sets the speed.

set(boolean) - Method in class io.github.robolib.module.iface.Relay

set(Relay.RelayValue) - Method in class io.github.robolib.module.iface.Relay

Set the relay state.

set(int, boolean) - Method in class io.github.robolib.nettable.entry.BooleanArray

set(int, double) - Method in class io.github.robolib.nettable.entry.NumberArray

set(int, String) - Method in class io.github.robolib.nettable.entry.StringArray

set(GameMode, RobotMode) - Static method in class io.github.robolib.RoboLib

Add the a RobotMode to the ModeSwitcher this will overwrite any previous mode that has the same GameMode.

setAbsoluteTolerance(double) - Method in class io.github.robolib.command.PIDSubsystem

Set the absolute error which is considered tolerable for use with OnTarget.

setAbsoluteTolerance(double) - Method in class io.github.robolib.module.controller.PIDController

Set the absolute error which is considered tolerable for use with OnTarget.

setAccelerometerActive(boolean) - Static method in class io.github.robolib.jni.AccelerometerJNI

setAccelerometerPowerOnDelay(byte) - Method in class io.github.robolib.module.sensor.mpu6050.MPU6050

Set accelerometer power-on delay.

setAccelerometerRange(int) - Static method in class io.github.robolib.jni.AccelerometerJNI

setAccelFIFOEnabled(boolean) - Method in class io.github.robolib.module.sensor.mpu6050.MPU6050

Set accelerometer FIFO enabled value.

setAccelRange(IAccelerometer.AccelRange) - Method in class io.github.robolib.module.sensor.ADXL345_I2C

setAccelRange(IAccelerometer.AccelRange) - Method in class io.github.robolib.module.sensor.ADXL345_SPI

setAccelRange(IAccelerometer.AccelRange) - Static method in class io.github.robolib.module.sensor.InternalAccelerometer

setAccelRange(IAccelerometer.AccelRange) - Method in class io.github.robolib.module.sensor.mpu6050.MPU6050

setAccelXSelfTest(boolean) - Method in class io.github.robolib.module.sensor.mpu6050.MPU6050

Get self-test enabled setting for accelerometer X axis.

setAccelYSelfTest(boolean) - Method in class io.github.robolib.module.sensor.mpu6050.MPU6050

Get self-test enabled value for accelerometer Y axis.

setAccelZSelfTest(boolean) - Method in class io.github.robolib.module.sensor.mpu6050.MPU6050

Set self-test enabled value for accelerometer Z axis.

setAccumulatorCenter(ByteBuffer, int, IntBuffer) - Static method in class io.github.robolib.jni.AnalogJNI

setAccumulatorCenter(int) - Method in class io.github.robolib.module.iface.AnalogInput

Set the center value of the accumulator.

setAccumulatorDeadband(ByteBuffer, int, IntBuffer) - Static method in class io.github.robolib.jni.AnalogJNI

setAccumulatorDeadband(int) - Method in class io.github.robolib.module.iface.AnalogInput

Set the accumulator's deadband.

setAccumulatorInitialValue(long) - Method in class io.github.robolib.module.iface.AnalogInput

Set an initial value for the accumulator.

setActive() - Method in class io.github.robolib.RobotMode

Set this RobotMode as the active robot mode for its GameMode.

setAnalogAverageBits(ByteBuffer, int, IntBuffer) - Static method in class io.github.robolib.jni.AnalogJNI

setAnalogOutput(ByteBuffer, double, IntBuffer) - Static method in class io.github.robolib.jni.AnalogJNI

setAnalogOversampleBits(ByteBuffer, int, IntBuffer) - Static method in class io.github.robolib.jni.AnalogJNI

setAnalogSampleRate(double, IntBuffer) - Static method in class io.github.robolib.jni.AnalogJNI

setAnalogTriggerAveraged(ByteBuffer, byte, IntBuffer) - Static method in class io.github.robolib.jni.AnalogJNI

setAnalogTriggerFiltered(ByteBuffer, byte, IntBuffer) - Static method in class io.github.robolib.jni.AnalogJNI

setAnalogTriggerLimitsRaw(ByteBuffer, int, int, IntBuffer) - Static method in class io.github.robolib.jni.AnalogJNI

setAnalogTriggerLimitsVoltage(ByteBuffer, double, double, IntBuffer) - Static method in class io.github.robolib.jni.AnalogJNI

setAngle(double) - Method in interface io.github.robolib.identifier.AngleSink

setAngle(double) - Method in class io.github.robolib.module.actuator.Servo

Set the servo angle.

setAuxVDDIOLevel(byte) - Method in class io.github.robolib.module.sensor.mpu6050.MPU6050

Set the auxiliary I2C supply voltage level.

setAverageBits(int) - Method in class io.github.robolib.module.iface.AnalogInput

Set the number of averaging bits.

setAveraged(boolean) - Method in class io.github.robolib.module.iface.AnalogInput

Configure the analog trigger to use the averaged vs.

setAxis(int, HIDAxis) - Method in class io.github.robolib.module.hid.GenericHID

Set a Joystick HIDAxis.

setAxisDeadband(int, double) - Method in class io.github.robolib.module.hid.GenericHID

Set a Joystick HIDAxis Deadband.

setAxisInverted(int) - Method in class io.github.robolib.module.hid.GenericHID

Invert a Joystick HIDAxis.

setBacklash(double) - Method in interface io.github.robolib.module.hid.HIDAxis

setBacklash(double) - Method in class io.github.robolib.module.hid.Joystick.JoystickAxis

setBacklash(double) - Method in class io.github.robolib.module.hid.NetTableController.NetTableAxis

setBacklash(double) - Method in class io.github.robolib.module.hid.XBoxController.MagAxis

setBounds(double, double, double, double, double) - Method in class io.github.robolib.module.iface.PWM

Set the bounds on pulse widths for this PWM.

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.AIMGradeReport

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.Annulus

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.ArcInfo

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.ArcInfo2

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.AVIInfo

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.AxisReport

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.Barcode2DInfo

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.BarcodeInfo

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.BCGOptions

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.BestCircle

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.BestCircle2

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.BestEllipse

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.BestEllipse2

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.BestLine

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.BrowserOptions

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.CalibrationAxisInfo

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.CalibrationInfo

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.CalibrationLearnSetupInfo

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.CalibrationPoints

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.CalibrationReferencePoints

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.CaliperOptions

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.CaliperReport

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.CannyOptions

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.CharacterStatistics

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.CharInfo

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.CharInfo2

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.CharReport

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.CharReport2

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.CharReport3

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.CIELabValue

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.CIEXYZValue

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.CircleDescriptor

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.CircleFeature

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.CircleFitOptions

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.CircleMatch

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.CircleReport

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.ClampMax2Report

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.ClampOverlaySettings

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.ClampPoints

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.ClampResults

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.ClampSettings

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.ClassifiedCurve

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.ClassifiedDisparity

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.ClassifierAccuracyReport

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.ClassifierReport

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.ClassifierReportAdvanced

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.ClassifierSampleInfo

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.ClassifyDistancesReport

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.ClassScore

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.ClosedContour

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.ClosedCurveFeature

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.ColorHistogramReport

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.ColorInformation

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.ColorOptions

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.ColorSegmenationOptions

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.Complex

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.ComputeDistancesReport

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.ConcentricEdgeFitOptions

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.ConcentricRakeReport

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.ConcentricRakeReport2

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.ConnectionConstraint

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.ConstCurveFeature

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.ConstructROIOptions

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.ConstructROIOptions2

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.ContourComputeCurvatureReport

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.ContourFitLineReport

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.ContourFitPolynomialReport

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.ContourFitSplineReport

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.ContourInfo

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.ContourInfo2

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.ContourInfoReport

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.ContourOverlaySettings

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.ContourPoint

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.CooccurrenceOptions

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.CoordinateSystem

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.CoordinateTransform

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.CoordinateTransform2

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.CornerFeature

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.CurvatureAnalysisReport

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.Curve

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.CurveOptions

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.CurveParameters

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.DataMatrixDescriptionOptions

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.DataMatrixOptions

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.DataMatrixReport

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.DataMatrixSearchOptions

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.DataMatrixSizeOptions

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.DetectExtremesOptions

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.Disparity

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.DisplacementVector

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.DisplayMapping

setBuffer(ByteBuffer, int, int) - Method in class com.ni.vision.NIVision.DisposedStruct

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.DistortionModelParams

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.DivisionModel

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.DrawTextOptions

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.EdgeInfo

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.EdgeLocationReport

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.EdgeOptions

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.EdgeOptions2

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.EdgePolarity

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.EdgeReport

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.EdgeReport2

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.EllipseDescriptor

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.EllipseFeature

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.EllipseMatch

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.ErrorStatistics

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.ExtractContourReport

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.ExtractTextureFeaturesReport

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.ExtremeReport

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.FeatureData

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.FindCircularEdgeOptions

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.FindCircularEdgeReport

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.FindConcentricEdgeOptions

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.FindConcentricEdgeReport

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.FindEdgeOptions2

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.FindEdgeReport

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.FindTransformRectOptions2

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.FindTransformRectsOptions2

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.FitCircleOptions

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.FitEllipseOptions

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.FitLineOptions

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.FocalLength

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.GeometricAdvancedSetupDataOption

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.GeometricPatternMatch

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.GeometricPatternMatch2

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.GeometricPatternMatch3

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.GetCalibrationInfoReport

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.GetCameraParametersReport

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.GridDescriptor

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.HistogramReport

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.HSIValue

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.HSLValue

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.HSVValue

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.ImageInfo

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.ImageSize

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.IMAQdxAttributeInformation

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.IMAQdxCameraFile

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.IMAQdxCameraInformation

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.IMAQdxEnumItem

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.InspectionAlignment

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.InspectionOptions

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.InternalParameters

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.JPEG2000FileAdvancedOptions

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.LabelToROIReport

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.LCDOptions

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.LCDReport

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.LCDSegments

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.LearnCalibrationOptions

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.LearnColorPatternOptions

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.LearnGeometricPatternAdvancedOptions

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.LearnGeometricPatternAdvancedOptions2

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.LearnPatternAdvancedOptions

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.LearnPatternAdvancedRotationOptions

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.LearnPatternAdvancedShiftOptions

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.LegFeature

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.Line

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.LinearAverages

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.LineDescriptor

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.LineEquation

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.LineFeature

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.LineFloat

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.LineMatch

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.LineProfile

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.MatchColorPatternOptions

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.MatchGeometricPatternAdvancedOptions

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.MatchGeometricPatternAdvancedOptions2

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.MatchGeometricPatternAdvancedOptions3

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.MatchGeometricPatternOptions

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.MatchMode

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.MatchPatternAdvancedOptions

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.MatchPatternOptions

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.MaxGridSize

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.MeasureParticlesReport

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.MeterArc

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.NearestNeighborClassResult

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.NearestNeighborOptions

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.NearestNeighborTrainingReport

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.OCRProcessingOptions

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.OCRSpacingOptions

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.OpenContour

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.OverlayTextOptions

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.PairOfParallelLinePairsFeature

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.ParallelLinePairFeature

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.PartialCircle

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.PartialEllipse

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.ParticleClassifierAutoThresholdOptions

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.ParticleClassifierLocalThresholdOptions

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.ParticleClassifierOptions

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.ParticleClassifierPreprocessingOptions

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.ParticleClassifierPreprocessingOptions2

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.ParticleFilterCriteria

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.ParticleFilterCriteria2

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.ParticleFilterOptions

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.ParticleFilterOptions2

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.ParticleReport

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.PatternMatch

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.Point

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.PointDouble

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.PointDoublePair

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.PointFloat

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.PolyModel

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.QRCodeDataToken

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.QRCodeDescriptionOptions

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.QRCodeReport

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.QRCodeSearchOptions

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.QRCodeSizeOptions

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.QuantifyData

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.QuantifyReport

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.RakeOptions

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.RakeReport

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.RakeReport2

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.Range

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.RangeDouble

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.RangeFloat

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.RangeLabel

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.RangeSettingDouble

setBuffer(ByteBuffer) - Method in class com.ni.vision.NIVision.RawData

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.ReadTextOptions

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.ReadTextReport

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.ReadTextReport2

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.ReadTextReport3

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.Rect

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.RectangleDescriptor

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.RectangleFeature

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.RectangleMatch

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.RGBU64Value

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.RGBValue

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.ROILabel

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.ROIProfile

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.RotatedRect

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.RotationAngleRange

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.SampleScore

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.SearchArcInfo

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.SearchLineInfo

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.SegmentInfo

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.SelectParticleCriteria

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.SetupMatchPatternData

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.ShapeDetectionOptions

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.ShapeReport

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.SimpleEdgeOptions

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.SpokeOptions

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.SpokeReport

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.SpokeReport2

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.StraightEdge

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.StraightEdgeOptions

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.StraightEdgeReport2

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.StructuringElement

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.SupervisedColorSegmentationReport

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.ThresholdData

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.TIFFFileOptions

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.ToolWindowOptions

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.TransformBehaviors

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.TransformReport

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.UserPointSymbol

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.View3DOptions

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.WaveletBandsReport

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.WaveletOptions

setBuffer(ByteBuffer, int) - Method in class com.ni.vision.NIVision.WindowSize

setBufferMode(Serial.BufferMode) - Method in class io.github.robolib.module.iface.Serial

Specify the flushing behavior of the output buffer.

setButton(int, HIDButton) - Method in class io.github.robolib.module.hid.GenericHID

Set a Joystick HIDButton.

setCancelOnModeSwitch(boolean) - Method in class io.github.robolib.command.Command

Sets whether or not this Command should continue running when the robot switches mode.

setChipSelectActiveHigh() - Method in class io.github.robolib.module.iface.SPI

Configure the chip select line to be active high.

setChipSelectActiveLow() - Method in class io.github.robolib.module.iface.SPI

Configure the chip select line to be active low.

setClockActiveHight() - Method in class io.github.robolib.module.iface.SPI

Configure the clock output line to be active high.

setClockActiveLow() - Method in class io.github.robolib.module.iface.SPI

Configure the clock output line to be active low.

setClockOutputEnabled(boolean) - Method in class io.github.robolib.module.sensor.mpu6050.MPU6050

Set reference clock output enabled status.

setClockRate(int) - Method in class io.github.robolib.module.iface.SPI

Configure the rate of the generated clock signal.

setClockSource(MPU6050.GyroClockSource) - Method in class io.github.robolib.module.sensor.mpu6050.MPU6050

Set clock source setting.

setClosedLoopControl(ByteBuffer, boolean, IntBuffer) - Static method in class io.github.robolib.jni.CompressorJNI

SetCloseLoopRampRate(long, int) - Method in class io.github.robolib.jni.CanTalonSRX

setCloseLoopRampRate(double) - Method in class io.github.robolib.module.actuator.CANTalon

Set the closed loop ramp rate for the current profile.

setCommLED(char, IntBuffer) - Static method in class io.github.robolib.jni.HALUtil

setContinuous(boolean) - Method in class io.github.robolib.module.controller.PIDController

Set the PID controller to consider the input to be continuous, Rather then using the max and min in as constraints, it considers them to be the same point and automatically calculates the shortest route to the setpoint.

setContinuous() - Method in class io.github.robolib.module.controller.PIDController

Set the PID controller to consider the input to be continuous, Rather then using the max and min in as constraints, it considers them to be the same point and automatically calculates the shortest route to the setpoint.

setCounterAverageSize(ByteBuffer, int, IntBuffer) - Static method in class io.github.robolib.jni.CounterJNI

setCounterDownSource(ByteBuffer, int, byte, IntBuffer) - Static method in class io.github.robolib.jni.CounterJNI

setCounterDownSourceEdge(ByteBuffer, byte, byte, IntBuffer) - Static method in class io.github.robolib.jni.CounterJNI

setCounterExternalDirectionMode(ByteBuffer, IntBuffer) - Static method in class io.github.robolib.jni.CounterJNI

setCounterMaxPeriod(ByteBuffer, double, IntBuffer) - Static method in class io.github.robolib.jni.CounterJNI

setCounterPulseLengthMode(ByteBuffer, double, IntBuffer) - Static method in class io.github.robolib.jni.CounterJNI

setCounterReverseDirection(ByteBuffer, byte, IntBuffer) - Static method in class io.github.robolib.jni.CounterJNI

setCounterSamplesToAverage(ByteBuffer, int, IntBuffer) - Static method in class io.github.robolib.jni.CounterJNI

setCounterSemiPeriodMode(ByteBuffer, byte, IntBuffer) - Static method in class io.github.robolib.jni.CounterJNI

setCounterUpdateWhenEmpty(ByteBuffer, byte, IntBuffer) - Static method in class io.github.robolib.jni.CounterJNI

setCounterUpDownMode(ByteBuffer, IntBuffer) - Static method in class io.github.robolib.jni.CounterJNI

setCounterUpSource(ByteBuffer, int, byte, IntBuffer) - Static method in class io.github.robolib.jni.CounterJNI

setCounterUpSourceEdge(ByteBuffer, byte, byte, IntBuffer) - Static method in class io.github.robolib.jni.CounterJNI

setCurrentCommand(Command) - Method in class io.github.robolib.command.Subsystem

Sets the current command.

setCurrentMode(double, double, double) - Method in class io.github.robolib.module.actuator.CANJaguar

Enable controlling the motor current with a PID loop.
After calling this you must call CANJaguar.enableControl() or CANJaguar.enableControl(double) to enable the device.

setCurrentMode(CANJaguar.EncoderTag, int, double, double, double) - Method in class io.github.robolib.module.actuator.CANJaguar

Enable controlling the motor current with a PID loop, and enable speed sensing from a non-quadrature encoder.
After calling this you must call CANJaguar.enableControl() or CANJaguar.enableControl(double) to enable the device.

setCurrentMode(CANJaguar.QuadEncoderTag, int, double, double, double) - Method in class io.github.robolib.module.actuator.CANJaguar

Enable controlling the motor current with a PID loop, and enable speed and position sensing from a quadrature encoder.
After calling this you must call CANJaguar.enableControl() or CANJaguar.enableControl(double) to enable the device.

setCurrentMode(CANJaguar.PotentiometerTag, double, double, double) - Method in class io.github.robolib.module.actuator.CANJaguar

Enable controlling the motor current with a PID loop, and enable position sensing from a potentiometer.
After calling this you must call CANJaguar.enableControl() or CANJaguar.enableControl(double) to enable the device.

setCursor(int, int) - Method in class io.github.robolib.module.LCD2004

setD(double) - Method in class io.github.robolib.module.actuator.CANJaguar

Set the D constant for the closed loop modes.

setD(double) - Method in class io.github.robolib.module.actuator.CANTalon

Set the derivative constant of the currently selected profile.

setDeadband(double) - Method in interface io.github.robolib.module.hid.HIDAxis

Set the Deadband of the Axis.

setDeadband(double) - Method in class io.github.robolib.module.hid.Joystick.JoystickAxis

Set the Deadband of the Axis.

setDeadband(double) - Method in class io.github.robolib.module.hid.NetTableController.NetTableAxis

Set the Deadband of the Axis.

setDeadband(double) - Method in class io.github.robolib.module.hid.XBoxController.MagAxis

Set the Deadband of the Axis.

setDeadband(double) - Method in class io.github.robolib.module.sensor.AnalogGyro

Set the size of the neutral zone.

setDefaultCommand(Command) - Method in class io.github.robolib.command.Subsystem

Sets the default command.

SetDemand(int) - Method in class io.github.robolib.jni.CanTalonSRX

setDeviceID(byte) - Method in class io.github.robolib.module.sensor.mpu6050.MPU6050

Set Device ID.

SetDgain(long, double) - Method in class io.github.robolib.jni.CanTalonSRX

setDHPFMode(MPU6050.DHPFilterMode) - Method in class io.github.robolib.module.sensor.mpu6050.MPU6050

Set the high-pass filter configuration.

setDIO(ByteBuffer, short, IntBuffer) - Static method in class io.github.robolib.jni.DIOJNI

setDirection(Relay.RelayDirection) - Method in class io.github.robolib.module.iface.Relay

Set the Relay Direction Changes which values the relay can be set to depending on which direction is used Valid inputs are FORWARD, REVERSE, and BOTH

setDistancePerPulse(double) - Method in class io.github.robolib.module.sensor.Counter

Set the distance per pulse for this counter.

setDistancePerPulse(double) - Method in class io.github.robolib.module.sensor.Encoder

Set the distance per pulse for this encoder.

setDLPFMode(MPU6050.DLPFilterMode) - Method in class io.github.robolib.module.sensor.mpu6050.MPU6050

Set digital low-pass filter configuration.

setDMPConfig1(byte) - Method in class io.github.robolib.module.sensor.mpu6050.MPU6050

setDMPConfig2(byte) - Method in class io.github.robolib.module.sensor.mpu6050.MPU6050

setDMPEnabled(boolean) - Method in class io.github.robolib.module.sensor.mpu6050.MPU6050

Enable the Digital Motion Processor (DMP/DMPU)

setEnabled(boolean) - Static method in class io.github.robolib.command.Scheduler

Sets the enabled.

setEnabled(boolean) - Static method in class io.github.robolib.LiveWindow

setEnabled(boolean) - Static method in class io.github.robolib.util.TableSender

setEncoderIndexSource(ByteBuffer, int, boolean, boolean, boolean, IntBuffer) - Static method in class io.github.robolib.jni.EncoderJNI

setEncoderMaxPeriod(ByteBuffer, double, IntBuffer) - Static method in class io.github.robolib.jni.EncoderJNI

setEncoderReverseDirection(ByteBuffer, byte, IntBuffer) - Static method in class io.github.robolib.jni.EncoderJNI

setEncoderSamplesToAverage(ByteBuffer, int, IntBuffer) - Static method in class io.github.robolib.jni.EncoderJNI

setErrorData(String, int, int) - Static method in class io.github.robolib.jni.NetworkCommunications

Original signature : int setErrorData(const char*, int, int)
native declaration : src\main\include\NetworkCommunication\FRCComm.h:136

setExpiration(double) - Method in class io.github.robolib.module.MotorSafetyHelper

Sets the expiration.

setExternalDirectionMode() - Method in class io.github.robolib.module.sensor.Counter

Set external direction mode on this counter.

setExternalFrameSync(MPU6050.EXTFrameSyncBitLocation) - Method in class io.github.robolib.module.sensor.mpu6050.MPU6050

Set external FSYNC configuration.

setExternalShadowDelayEnabled(boolean) - Method in class io.github.robolib.module.sensor.mpu6050.MPU6050

Set external data shadow delay enabled status.

setF(double) - Method in class io.github.robolib.module.actuator.CANTalon

Set the feedforward value of the currently selected profile.

setFeedbackDevice(CANTalon.FeedbackDevice) - Method in class io.github.robolib.module.actuator.CANTalon

SetFeedbackDeviceSelect(int) - Method in class io.github.robolib.jni.CanTalonSRX

SetFgain(long, double) - Method in class io.github.robolib.jni.CanTalonSRX

setFIFOByte(byte) - Method in class io.github.robolib.module.sensor.mpu6050.MPU6050

Write byte to FIFO buffer.

setFIFOEnabled(boolean) - Method in class io.github.robolib.module.sensor.mpu6050.MPU6050

Set FIFO enabled status.

setFiltered(boolean) - Method in class io.github.robolib.module.iface.AnalogInput

Configure the analog trigger to use a filtered value.

setFineControl(double) - Method in interface io.github.robolib.module.hid.HIDAxis

setFineControl(double) - Method in class io.github.robolib.module.hid.Joystick.JoystickAxis

setFineControl(double) - Method in class io.github.robolib.module.hid.NetTableController.NetTableAxis

setFineControl(double) - Method in class io.github.robolib.module.hid.XBoxController.MagAxis

setFlowControl(Serial.FlowControl) - Method in class io.github.robolib.module.iface.Serial

Set the type of flow control to enable on this port.

SetForwardSoftEnable(int) - Method in class io.github.robolib.jni.CanTalonSRX

SetForwardSoftLimit(int) - Method in class io.github.robolib.jni.CanTalonSRX

setForwardSoftLimit(int) - Method in class io.github.robolib.module.actuator.CANTalon

setFreefallDetectionCounterDecrement(byte) - Method in class io.github.robolib.module.sensor.mpu6050.MPU6050

Set Free Fall detection counter decrement configuration.

setFreefallDetectionDuration(byte) - Method in class io.github.robolib.module.sensor.mpu6050.MPU6050

Get free-fall event duration threshold.

setFreefallDetectionThreshold(byte) - Method in class io.github.robolib.module.sensor.mpu6050.MPU6050

Get free-fall event acceleration threshold.

setFSyncInterruptEnabled(boolean) - Method in class io.github.robolib.module.sensor.mpu6050.MPU6050

Set FSYNC pin interrupt enabled setting.

setFSyncInterruptLevel(boolean) - Method in class io.github.robolib.module.sensor.mpu6050.MPU6050

Set FSYNC interrupt logic level mode.

setFullScaleAccelRange(IAccelerometer.AccelRange) - Method in class io.github.robolib.module.sensor.mpu6050.MPU6050

Set full-scale accelerometer range.

setFullScaleGyroRange(MPU6050.GyroRange) - Method in class io.github.robolib.module.sensor.mpu6050.MPU6050

Set full-scale gyroscope range.

setGain(HMC5883L.Gain) - Method in class io.github.robolib.module.sensor.HMC5883L

Set the HMC5883L.Gain to use for measurement.

setGlobalSampleRate(double) - Static method in class io.github.robolib.module.iface.AnalogInput

Set the sample rate per channel.

setI(double) - Method in class io.github.robolib.module.actuator.CANJaguar

Set the I constant for the closed loop modes.

setI(double) - Method in class io.github.robolib.module.actuator.CANTalon

Set the integration constant of the currently selected profile.

setI2CBypassEnabled(boolean) - Method in class io.github.robolib.module.sensor.mpu6050.MPU6050

Set I2C bypass enabled status.

setI2CMasterModeEnabled(boolean) - Method in class io.github.robolib.module.sensor.mpu6050.MPU6050

Set I2C Master Mode enabled status.

setId(char) - Method in class io.github.robolib.nettable.entry.NTTableEntry

Sets the id of the entry

SetIgain(long, double) - Method in class io.github.robolib.jni.CanTalonSRX

setIndexSource(DigitalIO.DigitalChannel, Encoder.IndexingType) - Method in class io.github.robolib.module.sensor.Encoder

Set the index source for the encoder.

setIndexSource(DigitalIO, Encoder.IndexingType) - Method in class io.github.robolib.module.sensor.Encoder

Set the index source for the encoder.

setIndexSource(DigitalIO.DigitalChannel) - Method in class io.github.robolib.module.sensor.Encoder

Set the index source for the encoder.

setIndexSource(DigitalIO) - Method in class io.github.robolib.module.sensor.Encoder

Set the index source for the encoder.

setInOutReceiver(NTWriteManager) - Method in class io.github.robolib.nettable.entry.NTEntryStore

setInputRange(double, double) - Method in class io.github.robolib.command.PIDCommand

Sets the maximum and minimum values expected from the input and setpoint.

setInputRange(double, double) - Method in class io.github.robolib.command.PIDSubsystem

Sets the maximum and minimum values expected from the input and setpoint.

setInputRange(double, double) - Method in class io.github.robolib.module.controller.PIDController

Sets the maximum and minimum values expected from the input and setpoint.

setIntDataReadyEnabled(boolean) - Method in class io.github.robolib.module.sensor.mpu6050.MPU6050

Set Data Ready interrupt enabled status.

setIntDMPEnabled(boolean) - Method in class io.github.robolib.module.sensor.mpu6050.MPU6050

setIntEnabled(byte) - Method in class io.github.robolib.module.sensor.mpu6050.MPU6050

Set full interrupt enabled status.

setInterruptDrive(boolean) - Method in class io.github.robolib.module.sensor.mpu6050.MPU6050

Set interrupt drive mode.

setInterruptible(boolean) - Method in class io.github.robolib.command.Command

Sets the interruptible.

setInterruptLatch(boolean) - Method in class io.github.robolib.module.sensor.mpu6050.MPU6050

Set interrupt latch mode.

setInterruptLatchClear(boolean) - Method in class io.github.robolib.module.sensor.mpu6050.MPU6050

Set interrupt latch clear mode.

setInterruptMode(boolean) - Method in class io.github.robolib.module.sensor.mpu6050.MPU6050

Set interrupt logic level mode.

setInterruptUpSourceEdge(ByteBuffer, byte, byte, IntBuffer) - Static method in class io.github.robolib.jni.InterruptJNI

setIntFIFOBufferOverflowEnabled(boolean) - Method in class io.github.robolib.module.sensor.mpu6050.MPU6050

Set FIFO Buffer Overflow interrupt enabled status.

setIntFreefallEnabled(boolean) - Method in class io.github.robolib.module.sensor.mpu6050.MPU6050

Set Free Fall interrupt enabled status.

setIntI2CMasterEnabled(boolean) - Method in class io.github.robolib.module.sensor.mpu6050.MPU6050

Set I2C Master interrupt enabled status.

setIntMotionEnabled(boolean) - Method in class io.github.robolib.module.sensor.mpu6050.MPU6050

Set Motion Detection interrupt enabled status.

setIntPLLReadyEnabled(boolean) - Method in class io.github.robolib.module.sensor.mpu6050.MPU6050

setIntZeroMotionEnabled(boolean) - Method in class io.github.robolib.module.sensor.mpu6050.MPU6050

Set Zero Motion Detection interrupt enabled status.

setInverted(boolean) - Method in class io.github.robolib.module.actuator.CANJaguar

Set the inverted state of the speed controller.

setInverted(boolean) - Method in class io.github.robolib.module.actuator.CANTalon

setInverted(boolean) - Method in class io.github.robolib.module.controller.LimitedController

Set the inverted state of the speed controller.

setInverted(boolean) - Method in class io.github.robolib.module.controller.NullController

Do absolutely nothing

setInverted(boolean) - Method in class io.github.robolib.module.controller.PWMController

Set the inverted state of the speed controller.

setInverted(boolean) - Method in interface io.github.robolib.module.controller.SpeedController

Set the inverted state of the speed controller.

setInverted(boolean) - Method in interface io.github.robolib.module.hid.HIDAxis

Invert the Axis.

setInverted(boolean) - Method in class io.github.robolib.module.hid.Joystick.JoystickAxis

Invert the Axis.

setInverted(boolean) - Method in class io.github.robolib.module.hid.NetTableController.NetTableAxis

Invert the Axis.

setInverted(boolean) - Method in class io.github.robolib.module.hid.XBoxController.MagAxis

Does Nothing

SetIzone(long, int) - Method in class io.github.robolib.jni.CanTalonSRX

setIZone(int) - Method in class io.github.robolib.module.actuator.CANTalon

Set the integration zone of the current Closed Loop profile.

setJoystickData(int, short[], short[], int, byte) - Static method in class io.github.robolib.module.hid.Joystick

Sets the joystick data.

setLeftMotors(double) - Method in class io.github.robolib.module.actuator.DriveBase

Set the speed of the left motors.

setLimitsRaw(int, int) - Method in class io.github.robolib.module.iface.AnalogInput

Set the upper and lower limits of the analog trigger.

setLimitsVoltage(double, double) - Method in class io.github.robolib.module.iface.AnalogInput

Set the upper and lower limits of the analog trigger.

setLSBFirst() - Method in class io.github.robolib.module.iface.SPI

Configure the order that bits are sent and received on the wire to be least significant bit first.

setMapFile(String) - Static method in class io.github.robolib.util.mapper.RobotMap

setMasterClockSpeed(MPU6050.ClockSpeed) - Method in class io.github.robolib.module.sensor.mpu6050.MPU6050

Set I2C master clock speed.

setMaxPeriod(double) - Method in class io.github.robolib.module.sensor.Counter

Set the maximum period where the device is still considered "moving".

setMaxPeriod(double) - Method in class io.github.robolib.module.sensor.CounterBase

Set the maximum time between edges to be considered stalled

setMaxPeriod(double) - Method in class io.github.robolib.module.sensor.Encoder

Sets the maximum period for stopped detection.

setMeasurementMode(HMC5883L.MeasurementMode) - Method in class io.github.robolib.module.sensor.HMC5883L

Set the HMC5883L.MeasurementMode to use

setMemoryBank(byte, boolean, boolean) - Method in class io.github.robolib.module.sensor.mpu6050.MPU6050

setMemoryBank(byte) - Method in class io.github.robolib.module.sensor.mpu6050.MPU6050

setMemoryStartAddress(byte) - Method in class io.github.robolib.module.sensor.mpu6050.MPU6050

setMinRate(double) - Method in class io.github.robolib.module.sensor.Encoder

Set the minimum rate of the device before the hardware reports it stopped.

setMode(Counter.CounterMode, Object...) - Method in class io.github.robolib.module.sensor.Counter

setModeLED(char, IntBuffer) - Static method in class io.github.robolib.jni.HALUtil

SetModeSelect(int) - Method in class io.github.robolib.jni.CanTalonSRX

SetModeSelect(int, int) - Method in class io.github.robolib.jni.CanTalonSRX

setMotionDetectionCounterDecrement(byte) - Method in class io.github.robolib.module.sensor.mpu6050.MPU6050

Set Motion detection counter decrement configuration.

setMotionDetectionDuration(byte) - Method in class io.github.robolib.module.sensor.mpu6050.MPU6050

Set motion detection event duration threshold.

setMotionDetectionThreshold(byte) - Method in class io.github.robolib.module.sensor.mpu6050.MPU6050

Set free-fall event acceleration threshold.

setMotorInverted(DriveBase.MotorType, boolean) - Method in class io.github.robolib.module.actuator.DriveBase

Invert a motor direction.

setMotors(double) - Method in class io.github.robolib.module.actuator.DriveBase

Set the speed of all the motors to a single value.

setMotors(double, double) - Method in class io.github.robolib.module.actuator.DriveBase

Set the speed of the right and left motors.

setMotors(double, double, double, double) - Method in class io.github.robolib.module.actuator.DriveBase

Set the speed of all the motors.

setMotors() - Method in class io.github.robolib.module.actuator.DriveBase

Set the speed of the motors to the values in m_wheelSpeeds.

setMSBFirst() - Method in class io.github.robolib.module.iface.SPI

Configure the order that bits are sent and received on the wire to be most significant bit first.

setMultiMasterEnabled(boolean) - Method in class io.github.robolib.module.sensor.mpu6050.MPU6050

Set multi-master enabled value.

setNewDataOccurRef(int) - Static method in class io.github.robolib.jni.NetworkCommunications

this uint32_t is really a LVRefNum
Original signature : void setNewDataOccurRef(uint32_t)
native declaration : src\main\include\NetworkCommunication\FRCComm.h:154

setNewDataSem(ByteBuffer) - Static method in class io.github.robolib.jni.NetworkCommunications

Original signature : void setNewDataSem(pthread_mutex_t*)
native declaration : src\main\include\NetworkCommunication\FRCComm.h:147

setOperatingMode(HMC5883L.OperatingMode) - Method in class io.github.robolib.module.sensor.HMC5883L

Set the HMC5883L.OperatingMode to run in.

setOTPBankValid(boolean) - Method in class io.github.robolib.module.sensor.mpu6050.MPU6050

setOutput(int, boolean) - Method in class io.github.robolib.module.hid.Joystick

setOutputRange(double, double) - Method in class io.github.robolib.command.PIDCommand

Sets the maximum and minimum values to write.

setOutputRange(double, double) - Method in class io.github.robolib.command.PIDSubsystem

Sets the maximum and minimum values to write.

setOutputRange(double, double) - Method in class io.github.robolib.module.controller.PIDController

Sets the minimum and maximum values to write.

setOutputRate(HMC5883L.OutputRate) - Method in class io.github.robolib.module.sensor.HMC5883L

Set the HMC5883L.OutputRate to used.

setOutputs(int) - Method in class io.github.robolib.module.hid.Joystick

SetOverrideBrakeType(int) - Method in class io.github.robolib.jni.CanTalonSRX

SetOverrideLimitSwitchEn(int) - Method in class io.github.robolib.jni.CanTalonSRX

setOversampleBits(int) - Method in class io.github.robolib.module.iface.AnalogInput

Set the number of oversample bits.

setP(double) - Method in class io.github.robolib.module.actuator.CANJaguar

Set the P constant for the closed loop modes.

setP(double) - Method in class io.github.robolib.module.actuator.CANTalon

Set the proportional value of the currently selected profile.

SetParam(CanTalonSRX.param_t, double) - Method in class io.github.robolib.jni.CanTalonSRX

setParent(CommandGroup) - Method in class io.github.robolib.command.Command

Sets the parent.

setPercentMode() - Method in class io.github.robolib.module.actuator.CANJaguar

Enable controlling the motor voltage as a percentage of the bus voltage without any position or speed feedback.
After calling this you must call CANJaguar.enableControl() or CANJaguar.enableControl(double) to enable the device.

setPercentMode(CANJaguar.EncoderTag, int) - Method in class io.github.robolib.module.actuator.CANJaguar

Enable controlling the motor voltage as a percentage of the bus voltage, and enable speed sensing from a non-quadrature encoder.
After calling this you must call CANJaguar.enableControl() or CANJaguar.enableControl(double) to enable the device.

setPercentMode(CANJaguar.QuadEncoderTag, int) - Method in class io.github.robolib.module.actuator.CANJaguar

Enable controlling the motor voltage as a percentage of the bus voltage, and enable position and speed sensing from a quadrature encoder.
After calling this you must call CANJaguar.enableControl() or CANJaguar.enableControl(double) to enable the device.

setPercentMode(CANJaguar.PotentiometerTag) - Method in class io.github.robolib.module.actuator.CANJaguar

Enable controlling the motor voltage as a percentage of the bus voltage, and enable position sensing from a potentiometer and no speed feedback.
After calling this you must call CANJaguar.enableControl() or CANJaguar.enableControl(double) to enable the device.

setPercentTolerance(double) - Method in class io.github.robolib.command.PIDSubsystem

Set the percentage error which is considered tolerable for use with OnTarget.

setPercentTolerance(double) - Method in class io.github.robolib.module.controller.PIDController

Set the percentage error which is considered tolerable for use with OnTarget.

setPeriodMultiplier(PWM.PeriodMultiplier) - Method in class io.github.robolib.module.iface.PWM

Set the period multiplier for older/newer devices.

SetPgain(long, double) - Method in class io.github.robolib.jni.CanTalonSRX

setPID(double, double, double) - Method in class io.github.robolib.module.actuator.CANJaguar

Set the P, I, and D constants for the closed loop modes.

setPID(double, double, double, double, int, double, int) - Method in class io.github.robolib.module.actuator.CANTalon

Sets control values for closed loop control.

setPID(double, double, double) - Method in class io.github.robolib.module.actuator.CANTalon

setPID(double, double, double) - Method in class io.github.robolib.module.controller.PIDController

Set the PID Controller gain parameters.

setPID(double, double, double, double) - Method in class io.github.robolib.module.controller.PIDController

Set the PID Controller gain parameters.

setPIDSourceType(PIDSource.PIDSourceType) - Method in class io.github.robolib.module.sensor.AnalogGyro

Set which parameter of the gyro you are using as a process control variable.

setPIDSourceType(PIDSource.PIDSourceType) - Method in class io.github.robolib.module.sensor.Counter

Set which parameter of the encoder you are using as a process control variable.

setPIDSourceType(PIDSource.PIDSourceType) - Method in class io.github.robolib.module.sensor.Encoder

Set which parameter of the encoder you are using as a process control variable.

setPinAsOutput(int) - Method in class io.github.robolib.module.ArdEx

setPosition(double) - Method in interface io.github.robolib.identifier.PositionSink

setPosition(double) - Method in class io.github.robolib.module.actuator.CANTalon

setPosition(double) - Method in class io.github.robolib.module.iface.PWM

Set the position of the servo.

setPositionMode(CANJaguar.QuadEncoderTag, int, double, double, double) - Method in class io.github.robolib.module.actuator.CANJaguar

Enable controlling the position with a feedback loop using an encoder.
After calling this you must call CANJaguar.enableControl() or CANJaguar.enableControl(double) to enable the device.

setPositionMode(CANJaguar.PotentiometerTag, double, double, double) - Method in class io.github.robolib.module.actuator.CANJaguar

Enable controlling the position with a feedback loop using a potentiometer.
After calling this you must call CANJaguar.enableControl() or CANJaguar.enableControl(double) to enable the device.

setPositionReference(int) - Method in class io.github.robolib.module.actuator.CANJaguar

Set the reference source device for position controller mode.

setProfile(int) - Method in class io.github.robolib.module.actuator.CANTalon

Select which closed loop profile to use, and uses whatever PIDF gains and the such that are already there.

SetProfileSlotSelect(int) - Method in class io.github.robolib.jni.CanTalonSRX

setPullup(int, boolean) - Method in class io.github.robolib.module.ArdEx

setPulseLengthMode(double) - Method in class io.github.robolib.module.sensor.Counter

Configure the counter to count in up or down based on the length of the input pulse.

setPWM(ByteBuffer, short, IntBuffer) - Static method in class io.github.robolib.jni.PWMJNI

setPWMDutyCycle(ByteBuffer, double, IntBuffer) - Static method in class io.github.robolib.jni.PWMJNI

setPWMOutputChannel(ByteBuffer, int, IntBuffer) - Static method in class io.github.robolib.jni.PWMJNI

setPWMPeriodScale(ByteBuffer, int, IntBuffer) - Static method in class io.github.robolib.jni.PWMJNI

setPWMRate(double, IntBuffer) - Static method in class io.github.robolib.jni.PWMJNI

setPWMRate(double) - Static method in class io.github.robolib.module.iface.DigitalOutput

Change the PWM frequency of the PWM output on a Digital Output line.

setRadioLED(char, IntBuffer) - Static method in class io.github.robolib.jni.HALUtil

setRampEnd(double) - Method in interface io.github.robolib.module.hid.HIDAxis

setRampEnd(double) - Method in class io.github.robolib.module.hid.Joystick.JoystickAxis

setRampEnd(double) - Method in class io.github.robolib.module.hid.NetTableController.NetTableAxis

setRampEnd(double) - Method in class io.github.robolib.module.hid.XBoxController.MagAxis

SetRampThrottle(int) - Method in class io.github.robolib.jni.CanTalonSRX

setRate(double) - Method in interface io.github.robolib.identifier.RateSink

setRate(byte) - Method in class io.github.robolib.module.sensor.mpu6050.MPU6050

Set gyroscope sample rate divider.

setRaw(int) - Method in class io.github.robolib.module.iface.PWM

Set the PWM value directly to the hardware.

setReadBufferSize(int) - Method in class io.github.robolib.module.iface.Serial

Specify the size of the input buffer.

setRelayForward(ByteBuffer, byte, IntBuffer) - Static method in class io.github.robolib.jni.RelayJNI

setRelayReverse(ByteBuffer, byte, IntBuffer) - Static method in class io.github.robolib.jni.RelayJNI

setResyncOccurRef(int) - Static method in class io.github.robolib.jni.NetworkCommunications

Original signature : void setResyncOccurRef(uint32_t)
native declaration : src\main\include\NetworkCommunication\FRCComm.h:156

setReverseDirection(boolean) - Method in class io.github.robolib.module.sensor.Counter

Set the Counter to return reversed sensing on the direction.

setReverseDirection(boolean) - Method in class io.github.robolib.module.sensor.Encoder

Set the direction sensing for this encoder.

SetReverseSoftEnable(int) - Method in class io.github.robolib.jni.CanTalonSRX

SetReverseSoftLimit(int) - Method in class io.github.robolib.jni.CanTalonSRX

setReverseSoftLimit(int) - Method in class io.github.robolib.module.actuator.CANTalon

SetRevFeedbackSensor(int) - Method in class io.github.robolib.jni.CanTalonSRX

SetRevMotDuringCloseLoopEn(int) - Method in class io.github.robolib.jni.CanTalonSRX

setRightMotors(double) - Method in class io.github.robolib.module.actuator.DriveBase

Set the speed of the right motors.

setRSLLED(boolean, IntBuffer) - Static method in class io.github.robolib.jni.HALUtil

setRumble(Joystick.RumbleSide, float) - Method in class io.github.robolib.module.hid.Joystick

Set the rumble output for the joystick.

setRunWhenDisabled(boolean) - Method in class io.github.robolib.command.Command

Sets whether or not this Command should run when the robot is disabled.

setSafetyEnabled(boolean) - Method in interface io.github.robolib.module.MotorSafety

Enable safety.

setSafetyEnabled(boolean) - Method in class io.github.robolib.module.MotorSafetyHelper

Enable safety.

setSafetyExpiration(double) - Method in interface io.github.robolib.module.MotorSafety

Sets the safety expiration.

setSampleDataOnFalling() - Method in class io.github.robolib.module.iface.SPI

Configure that the data is stable on the falling edge and the data changes on the rising edge.

setSampleDataOnRising() - Method in class io.github.robolib.module.iface.SPI

Configure that the data is stable on the rising edge and the data changes on the falling edge.

setSamplesPerAverage(int) - Method in class io.github.robolib.module.sensor.Counter

Set the Samples to Average which specifies the number of samples of the timer to average when calculating the period.

setSamplesPerAverage(int) - Method in class io.github.robolib.module.sensor.Encoder

Set the Samples to Average which specifies the number of samples of the timer to average when calculating the period.

setSamplesPerAverage(HMC5883L.Averaging) - Method in class io.github.robolib.module.sensor.HMC5883L

Set the HMC5883L.Averaging mode to use.

setSemiPeriodMode(boolean) - Method in class io.github.robolib.module.sensor.Counter

Set Semi-period mode on this counter.

setSensitivity(double) - Method in class io.github.robolib.module.sensor.AnalogGyro

Set the gyro sensitivity.

SetSensorPosition(int) - Method in class io.github.robolib.jni.CanTalonSRX

setSetpoint(double) - Method in class io.github.robolib.command.PIDCommand

Sets the setpoint to the given value.

setSetpoint(double) - Method in class io.github.robolib.command.PIDSubsystem

Sets the setpoint to the given value.

setSetpoint(double) - Method in class io.github.robolib.module.controller.PIDController

Set the setpoint for the PIDController

setSetpointRelative(double) - Method in class io.github.robolib.command.PIDCommand

Adds the given value to the setpoint.

setSetpointRelative(double) - Method in class io.github.robolib.command.PIDSubsystem

Adds the given value to the setpoint.

setSize(int) - Method in class io.github.robolib.nettable.entry.ArrayData

setSlave0FIFOEnabled(boolean) - Method in class io.github.robolib.module.sensor.mpu6050.MPU6050

Set Slave 0 FIFO enabled value.

setSlave1FIFOEnabled(boolean) - Method in class io.github.robolib.module.sensor.mpu6050.MPU6050

Set Slave 1 FIFO enabled value.

setSlave2FIFOEnabled(boolean) - Method in class io.github.robolib.module.sensor.mpu6050.MPU6050

Set Slave 2 FIFO enabled value.

setSlave3FIFOEnabled(boolean) - Method in class io.github.robolib.module.sensor.mpu6050.MPU6050

Set Slave 3 FIFO enabled value.

setSlave4Address(byte) - Method in class io.github.robolib.module.sensor.mpu6050.MPU6050

Set the I2C address of Slave 4.

setSlave4Enabled(boolean) - Method in class io.github.robolib.module.sensor.mpu6050.MPU6050

Set the enabled value for Slave 4.

setSlave4InterruptEnabled(boolean) - Method in class io.github.robolib.module.sensor.mpu6050.MPU6050

Set the enabled value for Slave 4 transaction interrupts.

setSlave4MasterDelay(byte) - Method in class io.github.robolib.module.sensor.mpu6050.MPU6050

Set Slave 4 master delay value.

setSlave4OutputByte(byte) - Method in class io.github.robolib.module.sensor.mpu6050.MPU6050

Set new byte to write to Slave 4.

setSlave4Register(byte) - Method in class io.github.robolib.module.sensor.mpu6050.MPU6050

Set the active internal register for Slave 4.

setSlave4WriteMode(boolean) - Method in class io.github.robolib.module.sensor.mpu6050.MPU6050

Set write mode for the Slave 4.

setSlaveAddress(byte, byte) - Method in class io.github.robolib.module.sensor.mpu6050.MPU6050

Set the I2C address of the specified slave (0-3).

setSlaveDataLength(byte, byte) - Method in class io.github.robolib.module.sensor.mpu6050.MPU6050

Set number of bytes to read for the specified slave (0-3).

setSlaveDelayEnabled(byte, boolean) - Method in class io.github.robolib.module.sensor.mpu6050.MPU6050

Set slave delay enabled status.

setSlaveEnabled(byte, boolean) - Method in class io.github.robolib.module.sensor.mpu6050.MPU6050

Set the enabled value for the specified slave (0-3).

setSlaveOutputByte(byte, byte) - Method in class io.github.robolib.module.sensor.mpu6050.MPU6050

Write byte to Data Output container for specified slave.

setSlaveReadWriteTransitionEnabled(boolean) - Method in class io.github.robolib.module.sensor.mpu6050.MPU6050

Set slave read/write transition enabled value.

setSlaveRegister(byte, byte) - Method in class io.github.robolib.module.sensor.mpu6050.MPU6050

Set the active internal register for the specified slave (0-3).

setSlaveWordByteSwap(byte, boolean) - Method in class io.github.robolib.module.sensor.mpu6050.MPU6050

Set word pair byte-swapping enabled for the specified slave (0-3).

setSlaveWordGroupOffset(byte, boolean) - Method in class io.github.robolib.module.sensor.mpu6050.MPU6050

Set word pair grouping order offset for the specified slave (0-3).

setSlaveWriteMode(byte, boolean) - Method in class io.github.robolib.module.sensor.mpu6050.MPU6050

Set write mode for the specified slave (0-3).

setSleepEnabled(boolean) - Method in class io.github.robolib.module.sensor.mpu6050.MPU6050

Set sleep mode status.

setSolenoid(ByteBuffer, byte, IntBuffer) - Static method in class io.github.robolib.jni.SolenoidJNI

setSource(Counter.SourceType, DigitalIO.DigitalChannel) - Method in class io.github.robolib.module.sensor.Counter

Set the Up or Down source for the counter as a digital input channel.

setSource(Counter.SourceType, DigitalIO) - Method in class io.github.robolib.module.sensor.Counter

Set the source object that causes the counter to count up or down.

setSourceEdge(Counter.SourceType, boolean, boolean) - Method in class io.github.robolib.module.sensor.Counter

Set the edge sensitivity on a counting source.

setSpeed(double) - Method in interface io.github.robolib.identifier.SpeedSink

setSpeed(double) - Method in class io.github.robolib.module.actuator.CANJaguar

Set the speed of the SpeedController

setSpeed(double) - Method in class io.github.robolib.module.actuator.CANTalon

setSpeed(double) - Method in class io.github.robolib.module.controller.LimitedController

Set the speed of the SpeedController

setSpeed(double) - Method in class io.github.robolib.module.controller.NullController

Do absolutely nothing

setSpeed(double) - Method in class io.github.robolib.module.controller.PWMController

Sets the speed.

setSpeed(double) - Method in interface io.github.robolib.module.controller.SpeedController

Set the speed of the SpeedController

setSpeed(double) - Method in class io.github.robolib.module.iface.PWM

Sets the speed.

setSpeedMode(CANJaguar.EncoderTag, int, double, double, double) - Method in class io.github.robolib.module.actuator.CANJaguar

Enable controlling the speed with a feedback loop from a non-quadrature encoder.
After calling this you must call CANJaguar.enableControl() or CANJaguar.enableControl(double) to enable the device.

setSpeedMode(CANJaguar.QuadEncoderTag, int, double, double, double) - Method in class io.github.robolib.module.actuator.CANJaguar

Enable controlling the speed with a feedback loop from a quadrature encoder.
After calling this you must call CANJaguar.enableControl() or CANJaguar.enableControl(double) to enable the device.

setSpeedReference(int) - Method in class io.github.robolib.module.actuator.CANJaguar

Set the reference source device for speed controller mode.

setStandbyXAccelEnabled(boolean) - Method in class io.github.robolib.module.sensor.mpu6050.MPU6050

Set X-axis accelerometer standby enabled status.

setStandbyXGyroEnabled(boolean) - Method in class io.github.robolib.module.sensor.mpu6050.MPU6050

Set X-axis gyroscope standby enabled status.

setStandbyYAccelEnabled(boolean) - Method in class io.github.robolib.module.sensor.mpu6050.MPU6050

Set Y-axis accelerometer standby enabled status.

setStandbyYGyroEnabled(boolean) - Method in class io.github.robolib.module.sensor.mpu6050.MPU6050

Set Y-axis gyroscope standby enabled status.

setStandbyZAccelEnabled(boolean) - Method in class io.github.robolib.module.sensor.mpu6050.MPU6050

Set Z-axis accelerometer standby enabled status.

setStandbyZGyroEnabled(boolean) - Method in class io.github.robolib.module.sensor.mpu6050.MPU6050

Set Z-axis gyroscope standby enabled status.

setState(boolean) - Method in interface io.github.robolib.identifier.BooleanSink

Set the value of this BooleanSink

setState(boolean) - Method in class io.github.robolib.module.actuator.Solenoid

Set the solenoid with a boolean value.

setState(boolean) - Method in class io.github.robolib.module.iface.DigitalOutput

Set the value of this BooleanSink

SetStatusFrameRate(long, long) - Method in class io.github.robolib.jni.CanTalonSRX

setStatusFrameRateMs(CANTalon.StatusFrameRate, int) - Method in class io.github.robolib.module.actuator.CANTalon

setTempFIFOEnabled(boolean) - Method in class io.github.robolib.module.sensor.mpu6050.MPU6050

Set temperature FIFO enabled value.

setTempSensorEnabled(boolean) - Method in class io.github.robolib.module.sensor.mpu6050.MPU6050

Set temperature sensor enabled status.

setTimeout(double) - Method in class io.github.robolib.command.Command

Sets the timeout.

setTimeout(double) - Method in class io.github.robolib.module.iface.Serial

Configure the timeout of the serial port.

settingType - Variable in class com.ni.vision.NIVision.RangeSettingDouble

SettingType(int) - Constructor for enum com.ni.vision.NIVision.SettingType

setTolerance(PIDController.Tolerance) - Method in class io.github.robolib.module.controller.PIDController

Set the PID tolerance using a Tolerance object.

setUpdateWhenEmpty(boolean) - Method in class io.github.robolib.module.sensor.Counter

Select whether you want to continue updating the event timer output when there are no samples captured.

setUpDownCounterMode() - Method in class io.github.robolib.module.sensor.Counter

Set standard up / down counting mode on this counter.

SetupMatchPatternData() - Constructor for class com.ni.vision.NIVision.SetupMatchPatternData

SetupMatchPatternData(byte[]) - Constructor for class com.ni.vision.NIVision.SetupMatchPatternData

SetupMatchPatternData(ByteBuffer, int) - Constructor for class com.ni.vision.NIVision.SetupMatchPatternData

SetupMatchPatternData(long, boolean) - Constructor for class com.ni.vision.NIVision.SetupMatchPatternData

setupPeriodicStatus() - Method in class io.github.robolib.module.actuator.CANJaguar

Enables periodic status updates from the Jaguar

setUpSourceEdge(boolean, boolean) - Method in class io.github.robolib.module.iface.InterruptBase

Set which edge to trigger interrupts on

setUsingHighSpeed(boolean) - Method in class io.github.robolib.module.sensor.HMC5883L

Set whether or not to use High Speed I2C mode (3400kHz)

setVoltage(double) - Method in class io.github.robolib.module.iface.AnalogOutput

setVoltageCritLevel(double) - Static method in class io.github.robolib.SystemMonitor

setVoltageDisableLevel(double) - Static method in class io.github.robolib.SystemMonitor

setVoltageMode() - Method in class io.github.robolib.module.actuator.CANJaguar

Enable controlling the motor voltage without any position or speed feedback.
After calling this you must call CANJaguar.enableControl() or CANJaguar.enableControl(double) to enable the device.

setVoltageMode(CANJaguar.EncoderTag, int) - Method in class io.github.robolib.module.actuator.CANJaguar

Enable controlling the motor voltage with speed feedback from a non-quadrature encoder and no position feedback.
After calling this you must call CANJaguar.enableControl() or CANJaguar.enableControl(double) to enable the device.

setVoltageMode(CANJaguar.QuadEncoderTag, int) - Method in class io.github.robolib.module.actuator.CANJaguar

Enable controlling the motor voltage with position and speed feedback from a quadrature encoder.
After calling this you must call CANJaguar.enableControl() or CANJaguar.enableControl(double) to enable the device.

setVoltageMode(CANJaguar.PotentiometerTag) - Method in class io.github.robolib.module.actuator.CANJaguar

Enable controlling the motor voltage with position feedback from a potentiometer and no speed feedback.

setVoltageRampRate(double) - Method in class io.github.robolib.module.actuator.CANJaguar

set the maximum voltage change rate.

setVoltageRampRate(double) - Method in class io.github.robolib.module.actuator.CANTalon

Set the voltage ramp rate for the current profile.

setVoltageWarnLevel(double) - Static method in class io.github.robolib.SystemMonitor

setWaitForExternalSensorEnabled(boolean) - Method in class io.github.robolib.module.sensor.mpu6050.MPU6050

Set wait-for-external-sensor-data enabled value.

setWakeCycleEnabled(boolean) - Method in class io.github.robolib.module.sensor.mpu6050.MPU6050

Set wake cycle enabled status.

setWakeFrequency(byte) - Method in class io.github.robolib.module.sensor.mpu6050.MPU6050

Set wake frequency in Accel-Only Low Power Mode.

setWriteBufferSize(int) - Method in class io.github.robolib.module.iface.Serial

Specify the size of the output buffer.

setXAccelOffset(int) - Method in class io.github.robolib.module.sensor.mpu6050.MPU6050

setXFineGain(byte) - Method in class io.github.robolib.module.sensor.mpu6050.MPU6050

setXGyroFIFOEnabled(boolean) - Method in class io.github.robolib.module.sensor.mpu6050.MPU6050

Set gyroscope X-axis FIFO enabled value.

setXGyroOffset(int) - Method in class io.github.robolib.module.sensor.mpu6050.MPU6050

setXGyroOffsetTC(byte) - Method in class io.github.robolib.module.sensor.mpu6050.MPU6050

setYAccelOffset(int) - Method in class io.github.robolib.module.sensor.mpu6050.MPU6050

setYFineGain(byte) - Method in class io.github.robolib.module.sensor.mpu6050.MPU6050

setYGyroFIFOEnabled(boolean) - Method in class io.github.robolib.module.sensor.mpu6050.MPU6050

Set gyroscope Y-axis FIFO enabled value.

setYGyroOffset(int) - Method in class io.github.robolib.module.sensor.mpu6050.MPU6050

setYGyroOffsetTC(byte) - Method in class io.github.robolib.module.sensor.mpu6050.MPU6050

setZAccelOffset(int) - Method in class io.github.robolib.module.sensor.mpu6050.MPU6050

setZeroLatch() - Method in class io.github.robolib.module.iface.PWM

Sets the zero latch.

setZeroMotionDetectionDuration(byte) - Method in class io.github.robolib.module.sensor.mpu6050.MPU6050

Set zero motion detection event duration threshold.

setZeroMotionDetectionThreshold(byte) - Method in class io.github.robolib.module.sensor.mpu6050.MPU6050

Set zero motion detection event acceleration threshold.

setZFineGain(byte) - Method in class io.github.robolib.module.sensor.mpu6050.MPU6050

setZGyroFIFOEnabled(boolean) - Method in class io.github.robolib.module.sensor.mpu6050.MPU6050

Set gyroscope Z-axis FIFO enabled value.

setZGyroOffset(int) - Method in class io.github.robolib.module.sensor.mpu6050.MPU6050

setZGyroOffsetTC(byte) - Method in class io.github.robolib.module.sensor.mpu6050.MPU6050

severe(Object, Object) - Method in class io.github.robolib.util.log.ILogger

Log an Object to the logger, with severe status.

severe(boolean, Object) - Method in class io.github.robolib.util.log.ILogger

Log a boolean to the logger, with severe status.

severe(char, Object) - Method in class io.github.robolib.util.log.ILogger

Log an char to the logger, with severe status.

severe(char[], Object) - Method in class io.github.robolib.util.log.ILogger

Log an char to the logger, with severe status.

severe(double, Object) - Method in class io.github.robolib.util.log.ILogger

Log an double to the logger, with severe status.

severe(float, Object) - Method in class io.github.robolib.util.log.ILogger

Log an float to the logger, with severe status.

severe(int, Object) - Method in class io.github.robolib.util.log.ILogger

Log an int to the logger, with severe status.

severe(long, Object) - Method in class io.github.robolib.util.log.ILogger

Log an long to the logger, with severe status.

severe(String) - Method in class io.github.robolib.util.log.ILogger

Log an String to the logger, with severe status.

severe(String, Object) - Method in class io.github.robolib.util.log.ILogger

Log an String to the logger, with severe status.

severe(String, Object) - Method in class io.github.robolib.util.log.Logger

Log an String to the logger, with severe status.

severe_imp(String, Object) - Method in class io.github.robolib.util.log.ILogger

Severe_imp.

ShapeDetectionOptions() - Constructor for class com.ni.vision.NIVision.ShapeDetectionOptions

ShapeDetectionOptions(int, NIVision.RangeFloat[], NIVision.RangeFloat, double) - Constructor for class com.ni.vision.NIVision.ShapeDetectionOptions

ShapeDetectionOptions(ByteBuffer, int) - Constructor for class com.ni.vision.NIVision.ShapeDetectionOptions

ShapeDetectionOptions(long, boolean) - Constructor for class com.ni.vision.NIVision.ShapeDetectionOptions

ShapeMode(int) - Constructor for enum com.ni.vision.NIVision.ShapeMode

ShapeReport() - Constructor for class com.ni.vision.NIVision.ShapeReport

ShapeReport(NIVision.Rect, NIVision.Point, int, double) - Constructor for class com.ni.vision.NIVision.ShapeReport

ShapeReport(ByteBuffer, int) - Constructor for class com.ni.vision.NIVision.ShapeReport

ShapeReport(long, boolean) - Constructor for class com.ni.vision.NIVision.ShapeReport

SHIFT - Static variable in class com.ni.vision.NIVision

ShiftBehavior - Variable in class com.ni.vision.NIVision.TransformBehaviors

shiftCount - Variable in class com.ni.vision.NIVision.DisplayMapping

shiftOptions - Variable in class com.ni.vision.NIVision.LearnPatternAdvancedOptions

showAnnulusTool - Variable in class com.ni.vision.NIVision.ToolWindowOptions

showClampLocation - Variable in class com.ni.vision.NIVision.ClampOverlaySettings

showClosedFreehandTool - Variable in class com.ni.vision.NIVision.ToolWindowOptions

showCurves - Variable in class com.ni.vision.NIVision.ClampOverlaySettings

showEdgesFound - Variable in class com.ni.vision.NIVision.FindCircularEdgeOptions

showEdgesFound - Variable in class com.ni.vision.NIVision.FindConcentricEdgeOptions

showEdgesFound - Variable in class com.ni.vision.NIVision.FindEdgeOptions2

showEdgesFound - Variable in class com.ni.vision.NIVision.FindTransformRectOptions2

showEdgesFound - Variable in class com.ni.vision.NIVision.FindTransformRectsOptions2

showFreehandTool - Variable in class com.ni.vision.NIVision.ToolWindowOptions

showLineTool - Variable in class com.ni.vision.NIVision.ToolWindowOptions

showOvalTool - Variable in class com.ni.vision.NIVision.ToolWindowOptions

showPanTool - Variable in class com.ni.vision.NIVision.ToolWindowOptions

showPointTool - Variable in class com.ni.vision.NIVision.ToolWindowOptions

showPolygonTool - Variable in class com.ni.vision.NIVision.ToolWindowOptions

showPolyLineTool - Variable in class com.ni.vision.NIVision.ToolWindowOptions

showRectangleTool - Variable in class com.ni.vision.NIVision.ToolWindowOptions

showResult - Variable in class com.ni.vision.NIVision.ClampOverlaySettings

showResult - Variable in class com.ni.vision.NIVision.FindCircularEdgeOptions

showResult - Variable in class com.ni.vision.NIVision.FindConcentricEdgeOptions

showResult - Variable in class com.ni.vision.NIVision.FindEdgeOptions2

showResult - Variable in class com.ni.vision.NIVision.FindTransformRectOptions2

showResult - Variable in class com.ni.vision.NIVision.FindTransformRectsOptions2

showRotatedRectangleTool - Variable in class com.ni.vision.NIVision.ToolWindowOptions

showSearchArea - Variable in class com.ni.vision.NIVision.ClampOverlaySettings

showSearchArea - Variable in class com.ni.vision.NIVision.FindCircularEdgeOptions

showSearchArea - Variable in class com.ni.vision.NIVision.FindConcentricEdgeOptions

showSearchArea - Variable in class com.ni.vision.NIVision.FindEdgeOptions2

showSearchArea - Variable in class com.ni.vision.NIVision.FindTransformRectOptions2

showSearchArea - Variable in class com.ni.vision.NIVision.FindTransformRectsOptions2

showSearchLines - Variable in class com.ni.vision.NIVision.FindCircularEdgeOptions

showSearchLines - Variable in class com.ni.vision.NIVision.FindConcentricEdgeOptions

showSearchLines - Variable in class com.ni.vision.NIVision.FindEdgeOptions2

showSearchLines - Variable in class com.ni.vision.NIVision.FindTransformRectOptions2

showSearchLines - Variable in class com.ni.vision.NIVision.FindTransformRectsOptions2

showSelectionTool - Variable in class com.ni.vision.NIVision.ToolWindowOptions

showZoomOutTool - Variable in class com.ni.vision.NIVision.ToolWindowOptions

showZoomTool - Variable in class com.ni.vision.NIVision.ToolWindowOptions

shutdown(boolean) - Method in class io.github.robolib.nettable.NTConnectionAdapter

stop the read thread and close the stream

sigma - Variable in class com.ni.vision.NIVision.CannyOptions

sigmaX - Variable in class com.ni.vision.NIVision.ParticleReport

sigmaXX - Variable in class com.ni.vision.NIVision.ParticleReport

sigmaXY - Variable in class com.ni.vision.NIVision.ParticleReport

sigmaY - Variable in class com.ni.vision.NIVision.ParticleReport

sigmaYY - Variable in class com.ni.vision.NIVision.ParticleReport

sign - Variable in class com.ni.vision.NIVision.LCDOptions

signalResyncActionDone() - Static method in class io.github.robolib.jni.NetworkCommunications

Original signature : void signalResyncActionDone()
native declaration : src\main\include\NetworkCommunication\FRCComm.h:150

SimpleEdgeOptions() - Constructor for class com.ni.vision.NIVision.SimpleEdgeOptions

SimpleEdgeOptions(NIVision.LevelType, int, int, NIVision.EdgeProcess, int) - Constructor for class com.ni.vision.NIVision.SimpleEdgeOptions

SimpleEdgeOptions(ByteBuffer, int) - Constructor for class com.ni.vision.NIVision.SimpleEdgeOptions

SimpleEdgeOptions(long, boolean) - Constructor for class com.ni.vision.NIVision.SimpleEdgeOptions

SimpleEdgeResult(ByteBuffer, long) - Constructor for class com.ni.vision.NIVision.SimpleEdgeResult

SingleActionCommand - Class in io.github.robolib.command

A command that runs one thing, then finishes

SingleActionCommand() - Constructor for class io.github.robolib.command.SingleActionCommand

SingleActionCommand(String) - Constructor for class io.github.robolib.command.SingleActionCommand

Sink - Interface in io.github.robolib.identifier

Represents an object that takes a value.

size() - Method in class com.ni.vision.NIVision.AIMGradeReport

size() - Method in class com.ni.vision.NIVision.Annulus

size() - Method in class com.ni.vision.NIVision.ArcInfo

size() - Method in class com.ni.vision.NIVision.ArcInfo2

size() - Method in class com.ni.vision.NIVision.AVIInfo

size() - Method in class com.ni.vision.NIVision.AxisReport

size() - Method in class com.ni.vision.NIVision.Barcode2DInfo

size - Variable in class com.ni.vision.NIVision.BarcodeInfo

size() - Method in class com.ni.vision.NIVision.BarcodeInfo

size() - Method in class com.ni.vision.NIVision.BCGOptions

size() - Method in class com.ni.vision.NIVision.BestCircle

size() - Method in class com.ni.vision.NIVision.BestCircle2

size() - Method in class com.ni.vision.NIVision.BestEllipse

size() - Method in class com.ni.vision.NIVision.BestEllipse2

size() - Method in class com.ni.vision.NIVision.BestLine

size() - Method in class com.ni.vision.NIVision.BrowserOptions

size() - Method in class com.ni.vision.NIVision.CalibrationAxisInfo

size() - Method in class com.ni.vision.NIVision.CalibrationInfo

size() - Method in class com.ni.vision.NIVision.CalibrationLearnSetupInfo

size() - Method in class com.ni.vision.NIVision.CalibrationPoints

size() - Method in class com.ni.vision.NIVision.CalibrationReferencePoints

size() - Method in class com.ni.vision.NIVision.CaliperOptions

size() - Method in class com.ni.vision.NIVision.CaliperReport

size() - Method in class com.ni.vision.NIVision.CannyOptions

size() - Method in class com.ni.vision.NIVision.CharacterStatistics

size() - Method in class com.ni.vision.NIVision.CharInfo

size() - Method in class com.ni.vision.NIVision.CharInfo2

size() - Method in class com.ni.vision.NIVision.CharReport

size() - Method in class com.ni.vision.NIVision.CharReport2

size() - Method in class com.ni.vision.NIVision.CharReport3

size() - Method in class com.ni.vision.NIVision.CIELabValue

size() - Method in class com.ni.vision.NIVision.CIEXYZValue

size() - Method in class com.ni.vision.NIVision.CircleDescriptor

size() - Method in class com.ni.vision.NIVision.CircleFeature

size() - Method in class com.ni.vision.NIVision.CircleFitOptions

size() - Method in class com.ni.vision.NIVision.CircleMatch

size() - Method in class com.ni.vision.NIVision.CircleReport

size() - Method in class com.ni.vision.NIVision.ClampMax2Report

size() - Method in class com.ni.vision.NIVision.ClampOverlaySettings

size() - Method in class com.ni.vision.NIVision.ClampPoints

size() - Method in class com.ni.vision.NIVision.ClampResults

size() - Method in class com.ni.vision.NIVision.ClampSettings

size() - Method in class com.ni.vision.NIVision.ClassifiedCurve

size() - Method in class com.ni.vision.NIVision.ClassifiedDisparity

size() - Method in class com.ni.vision.NIVision.ClassifierAccuracyReport

size() - Method in class com.ni.vision.NIVision.ClassifierReport

size() - Method in class com.ni.vision.NIVision.ClassifierReportAdvanced

size() - Method in class com.ni.vision.NIVision.ClassifierSampleInfo

size() - Method in class com.ni.vision.NIVision.ClassifyDistancesReport

size() - Method in class com.ni.vision.NIVision.ClassScore

size() - Method in class com.ni.vision.NIVision.ClosedContour

size() - Method in class com.ni.vision.NIVision.ClosedCurveFeature

size() - Method in class com.ni.vision.NIVision.ColorHistogramReport

size() - Method in class com.ni.vision.NIVision.ColorInformation

size() - Method in class com.ni.vision.NIVision.ColorOptions

size() - Method in class com.ni.vision.NIVision.ColorSegmenationOptions

size() - Method in class com.ni.vision.NIVision.Complex

size() - Method in class com.ni.vision.NIVision.ComputeDistancesReport

size() - Method in class com.ni.vision.NIVision.ConcentricEdgeFitOptions

size() - Method in class com.ni.vision.NIVision.ConcentricRakeReport

size() - Method in class com.ni.vision.NIVision.ConcentricRakeReport2

size() - Method in class com.ni.vision.NIVision.ConnectionConstraint

size() - Method in class com.ni.vision.NIVision.ConstCurveFeature

size() - Method in class com.ni.vision.NIVision.ConstructROIOptions

size() - Method in class com.ni.vision.NIVision.ConstructROIOptions2

size() - Method in class com.ni.vision.NIVision.ContourComputeCurvatureReport

size() - Method in class com.ni.vision.NIVision.ContourFitLineReport

size() - Method in class com.ni.vision.NIVision.ContourFitPolynomialReport

size() - Method in class com.ni.vision.NIVision.ContourFitSplineReport

size() - Method in class com.ni.vision.NIVision.ContourInfo

size() - Method in class com.ni.vision.NIVision.ContourInfo2

size() - Method in class com.ni.vision.NIVision.ContourInfoReport

size() - Method in class com.ni.vision.NIVision.ContourOverlaySettings

size() - Method in class com.ni.vision.NIVision.ContourPoint

size() - Method in class com.ni.vision.NIVision.CooccurrenceOptions

size() - Method in class com.ni.vision.NIVision.CoordinateSystem

size() - Method in class com.ni.vision.NIVision.CoordinateTransform

size() - Method in class com.ni.vision.NIVision.CoordinateTransform2

size() - Method in class com.ni.vision.NIVision.CornerFeature

size() - Method in class com.ni.vision.NIVision.CurvatureAnalysisReport

size() - Method in class com.ni.vision.NIVision.Curve

size() - Method in class com.ni.vision.NIVision.CurveOptions

size() - Method in class com.ni.vision.NIVision.CurveParameters

size() - Method in class com.ni.vision.NIVision.DataMatrixDescriptionOptions

size() - Method in class com.ni.vision.NIVision.DataMatrixOptions

size() - Method in class com.ni.vision.NIVision.DataMatrixReport

size() - Method in class com.ni.vision.NIVision.DataMatrixSearchOptions

size() - Method in class com.ni.vision.NIVision.DataMatrixSizeOptions

size() - Method in class com.ni.vision.NIVision.DetectExtremesOptions

size() - Method in class com.ni.vision.NIVision.Disparity

size() - Method in class com.ni.vision.NIVision.DisplacementVector

size() - Method in class com.ni.vision.NIVision.DisplayMapping

size() - Method in class com.ni.vision.NIVision.DisposedStruct

size() - Method in class com.ni.vision.NIVision.DistortionModelParams

size() - Method in class com.ni.vision.NIVision.DivisionModel

size() - Method in class com.ni.vision.NIVision.DrawTextOptions

size() - Method in class com.ni.vision.NIVision.EdgeInfo

size() - Method in class com.ni.vision.NIVision.EdgeLocationReport

size() - Method in class com.ni.vision.NIVision.EdgeOptions

size() - Method in class com.ni.vision.NIVision.EdgeOptions2

size() - Method in class com.ni.vision.NIVision.EdgePolarity

size() - Method in class com.ni.vision.NIVision.EdgeReport

size() - Method in class com.ni.vision.NIVision.EdgeReport2

size() - Method in class com.ni.vision.NIVision.EllipseDescriptor

size() - Method in class com.ni.vision.NIVision.EllipseFeature

size() - Method in class com.ni.vision.NIVision.EllipseMatch

size() - Method in class com.ni.vision.NIVision.ErrorStatistics

size() - Method in class com.ni.vision.NIVision.ExtractContourReport

size() - Method in class com.ni.vision.NIVision.ExtractTextureFeaturesReport

size() - Method in class com.ni.vision.NIVision.ExtremeReport

size() - Method in class com.ni.vision.NIVision.FeatureData

size() - Method in class com.ni.vision.NIVision.FindCircularEdgeOptions

size() - Method in class com.ni.vision.NIVision.FindCircularEdgeReport

size() - Method in class com.ni.vision.NIVision.FindConcentricEdgeOptions

size() - Method in class com.ni.vision.NIVision.FindConcentricEdgeReport

size() - Method in class com.ni.vision.NIVision.FindEdgeOptions2

size() - Method in class com.ni.vision.NIVision.FindEdgeReport

size() - Method in class com.ni.vision.NIVision.FindTransformRectOptions2

size() - Method in class com.ni.vision.NIVision.FindTransformRectsOptions2

size() - Method in class com.ni.vision.NIVision.FitCircleOptions

size() - Method in class com.ni.vision.NIVision.FitEllipseOptions

size() - Method in class com.ni.vision.NIVision.FitLineOptions

size() - Method in class com.ni.vision.NIVision.FocalLength

size() - Method in class com.ni.vision.NIVision.GeometricAdvancedSetupDataOption

size() - Method in class com.ni.vision.NIVision.GeometricPatternMatch

size() - Method in class com.ni.vision.NIVision.GeometricPatternMatch2

size() - Method in class com.ni.vision.NIVision.GeometricPatternMatch3

size() - Method in class com.ni.vision.NIVision.GetCalibrationInfoReport

size() - Method in class com.ni.vision.NIVision.GetCameraParametersReport

size() - Method in class com.ni.vision.NIVision.GridDescriptor

size() - Method in class com.ni.vision.NIVision.HistogramReport

size() - Method in class com.ni.vision.NIVision.HSIValue

size() - Method in class com.ni.vision.NIVision.HSLValue

size() - Method in class com.ni.vision.NIVision.HSVValue

size() - Method in class com.ni.vision.NIVision.ImageInfo

size() - Method in class com.ni.vision.NIVision.ImageSize

size() - Method in class com.ni.vision.NIVision.IMAQdxAttributeInformation

size() - Method in class com.ni.vision.NIVision.IMAQdxCameraFile

size() - Method in class com.ni.vision.NIVision.IMAQdxCameraInformation

size() - Method in class com.ni.vision.NIVision.IMAQdxEnumItem

size() - Method in class com.ni.vision.NIVision.InspectionAlignment

size() - Method in class com.ni.vision.NIVision.InspectionOptions

size() - Method in class com.ni.vision.NIVision.InternalParameters

size() - Method in class com.ni.vision.NIVision.JPEG2000FileAdvancedOptions

size() - Method in class com.ni.vision.NIVision.LabelToROIReport

size() - Method in class com.ni.vision.NIVision.LCDOptions

size() - Method in class com.ni.vision.NIVision.LCDReport

size() - Method in class com.ni.vision.NIVision.LCDSegments

size() - Method in class com.ni.vision.NIVision.LearnCalibrationOptions

size() - Method in class com.ni.vision.NIVision.LearnColorPatternOptions

size() - Method in class com.ni.vision.NIVision.LearnGeometricPatternAdvancedOptions

size() - Method in class com.ni.vision.NIVision.LearnGeometricPatternAdvancedOptions2

size() - Method in class com.ni.vision.NIVision.LearnPatternAdvancedOptions

size() - Method in class com.ni.vision.NIVision.LearnPatternAdvancedRotationOptions

size() - Method in class com.ni.vision.NIVision.LearnPatternAdvancedShiftOptions

size() - Method in class com.ni.vision.NIVision.LegFeature

size() - Method in class com.ni.vision.NIVision.Line

size() - Method in class com.ni.vision.NIVision.LinearAverages

size() - Method in class com.ni.vision.NIVision.LineDescriptor

size() - Method in class com.ni.vision.NIVision.LineEquation

size() - Method in class com.ni.vision.NIVision.LineFeature

size() - Method in class com.ni.vision.NIVision.LineFloat

size() - Method in class com.ni.vision.NIVision.LineMatch

size() - Method in class com.ni.vision.NIVision.LineProfile

size() - Method in class com.ni.vision.NIVision.MatchColorPatternOptions

size() - Method in class com.ni.vision.NIVision.MatchGeometricPatternAdvancedOptions

size() - Method in class com.ni.vision.NIVision.MatchGeometricPatternAdvancedOptions2

size() - Method in class com.ni.vision.NIVision.MatchGeometricPatternAdvancedOptions3

size() - Method in class com.ni.vision.NIVision.MatchGeometricPatternOptions

size() - Method in class com.ni.vision.NIVision.MatchMode

size() - Method in class com.ni.vision.NIVision.MatchPatternAdvancedOptions

size() - Method in class com.ni.vision.NIVision.MatchPatternOptions

size() - Method in class com.ni.vision.NIVision.MaxGridSize

size() - Method in class com.ni.vision.NIVision.MeasureParticlesReport

size() - Method in class com.ni.vision.NIVision.MeterArc

size() - Method in class com.ni.vision.NIVision.NearestNeighborClassResult

size() - Method in class com.ni.vision.NIVision.NearestNeighborOptions

size() - Method in class com.ni.vision.NIVision.NearestNeighborTrainingReport

size() - Method in class com.ni.vision.NIVision.OCRProcessingOptions

size() - Method in class com.ni.vision.NIVision.OCRSpacingOptions

size() - Method in class com.ni.vision.NIVision.OpenContour

size() - Method in class com.ni.vision.NIVision.OverlayTextOptions

size() - Method in class com.ni.vision.NIVision.PairOfParallelLinePairsFeature

size() - Method in class com.ni.vision.NIVision.ParallelLinePairFeature

size() - Method in class com.ni.vision.NIVision.PartialCircle

size() - Method in class com.ni.vision.NIVision.PartialEllipse

size() - Method in class com.ni.vision.NIVision.ParticleClassifierAutoThresholdOptions

size() - Method in class com.ni.vision.NIVision.ParticleClassifierLocalThresholdOptions

size() - Method in class com.ni.vision.NIVision.ParticleClassifierOptions

size() - Method in class com.ni.vision.NIVision.ParticleClassifierPreprocessingOptions

size() - Method in class com.ni.vision.NIVision.ParticleClassifierPreprocessingOptions2

size() - Method in class com.ni.vision.NIVision.ParticleFilterCriteria

size() - Method in class com.ni.vision.NIVision.ParticleFilterCriteria2

size() - Method in class com.ni.vision.NIVision.ParticleFilterOptions

size() - Method in class com.ni.vision.NIVision.ParticleFilterOptions2

size() - Method in class com.ni.vision.NIVision.ParticleReport

size() - Method in class com.ni.vision.NIVision.PatternMatch

size() - Method in class com.ni.vision.NIVision.Point

size() - Method in class com.ni.vision.NIVision.PointDouble

size() - Method in class com.ni.vision.NIVision.PointDoublePair

size() - Method in class com.ni.vision.NIVision.PointFloat

size() - Method in class com.ni.vision.NIVision.PolyModel

size() - Method in class com.ni.vision.NIVision.QRCodeDataToken

size() - Method in class com.ni.vision.NIVision.QRCodeDescriptionOptions

size() - Method in class com.ni.vision.NIVision.QRCodeReport

size() - Method in class com.ni.vision.NIVision.QRCodeSearchOptions

size() - Method in class com.ni.vision.NIVision.QRCodeSizeOptions

size() - Method in class com.ni.vision.NIVision.QuantifyData

size() - Method in class com.ni.vision.NIVision.QuantifyReport

size() - Method in class com.ni.vision.NIVision.RakeOptions

size() - Method in class com.ni.vision.NIVision.RakeReport

size() - Method in class com.ni.vision.NIVision.RakeReport2

size() - Method in class com.ni.vision.NIVision.Range

size() - Method in class com.ni.vision.NIVision.RangeDouble

size() - Method in class com.ni.vision.NIVision.RangeFloat

size() - Method in class com.ni.vision.NIVision.RangeLabel

size() - Method in class com.ni.vision.NIVision.RangeSettingDouble

size() - Method in class com.ni.vision.NIVision.ReadTextOptions

size() - Method in class com.ni.vision.NIVision.ReadTextReport

size() - Method in class com.ni.vision.NIVision.ReadTextReport2

size() - Method in class com.ni.vision.NIVision.ReadTextReport3

size() - Method in class com.ni.vision.NIVision.Rect

size() - Method in class com.ni.vision.NIVision.RectangleDescriptor

size() - Method in class com.ni.vision.NIVision.RectangleFeature

size() - Method in class com.ni.vision.NIVision.RectangleMatch

size() - Method in class com.ni.vision.NIVision.RGBU64Value

size() - Method in class com.ni.vision.NIVision.RGBValue

size() - Method in class com.ni.vision.NIVision.ROILabel

size() - Method in class com.ni.vision.NIVision.ROIProfile

size() - Method in class com.ni.vision.NIVision.RotatedRect

size() - Method in class com.ni.vision.NIVision.RotationAngleRange

size() - Method in class com.ni.vision.NIVision.SampleScore

size() - Method in class com.ni.vision.NIVision.SearchArcInfo

size() - Method in class com.ni.vision.NIVision.SearchLineInfo

size() - Method in class com.ni.vision.NIVision.SegmentInfo

size() - Method in class com.ni.vision.NIVision.SelectParticleCriteria

size() - Method in class com.ni.vision.NIVision.SetupMatchPatternData

size() - Method in class com.ni.vision.NIVision.ShapeDetectionOptions

size - Variable in class com.ni.vision.NIVision.ShapeReport

size() - Method in class com.ni.vision.NIVision.ShapeReport

size() - Method in class com.ni.vision.NIVision.SimpleEdgeOptions

size() - Method in class com.ni.vision.NIVision.SpokeOptions

size() - Method in class com.ni.vision.NIVision.SpokeReport

size() - Method in class com.ni.vision.NIVision.SpokeReport2

size() - Method in class com.ni.vision.NIVision.StraightEdge

size() - Method in class com.ni.vision.NIVision.StraightEdgeOptions

size() - Method in class com.ni.vision.NIVision.StraightEdgeReport2

size() - Method in class com.ni.vision.NIVision.StructuringElement

size() - Method in class com.ni.vision.NIVision.SupervisedColorSegmentationReport

size() - Method in class com.ni.vision.NIVision.ThresholdData

size() - Method in class com.ni.vision.NIVision.TIFFFileOptions

size() - Method in class com.ni.vision.NIVision.ToolWindowOptions

size() - Method in class com.ni.vision.NIVision.TransformBehaviors

size() - Method in class com.ni.vision.NIVision.TransformReport

size() - Method in class com.ni.vision.NIVision.UserPointSymbol

size() - Method in class com.ni.vision.NIVision.View3DOptions

size() - Method in class com.ni.vision.NIVision.WaveletBandsReport

size() - Method in class com.ni.vision.NIVision.WaveletOptions

size() - Method in class com.ni.vision.NIVision.WindowSize

size() - Method in class io.github.robolib.nettable.entry.ArrayData

sizeOfAppendStream - Variable in class com.ni.vision.NIVision.QRCodeReport

sizeReduction - Variable in class com.ni.vision.NIVision.View3DOptions

SizeType(int) - Constructor for enum com.ni.vision.NIVision.SizeType

SkeletonMethod(int) - Constructor for enum com.ni.vision.NIVision.SkeletonMethod

skewDegreesAllowed - Variable in class com.ni.vision.NIVision.DataMatrixSearchOptions

skewDegreesAllowed - Variable in class com.ni.vision.NIVision.QRCodeSearchOptions

skipLocation - Variable in class com.ni.vision.NIVision.DataMatrixSearchOptions

skipLocation - Variable in class com.ni.vision.NIVision.QRCodeSearchOptions

skipTo(char) - Method in class org.json.JSONTokener

Skip characters until the next character is the requested character.

SLEEP_TIME - Variable in class io.github.robolib.nettable.NTWriteManager

sliceByteBuffer(ByteBuffer, int, int) - Static method in class com.ni.vision.NIVision

SmartDashboard - Class in io.github.robolib.util

SmartDashboard() - Constructor for class io.github.robolib.util.SmartDashboard

SmartDashboard_Instance - Static variable in class io.github.robolib.jni.UsageReporting

smoothContours - Variable in class com.ni.vision.NIVision.MatchGeometricPatternAdvancedOptions2

Solenoid - Class in io.github.robolib.module.actuator

The Class Solenoid.

Solenoid(SolenoidBase.SolenoidChannel) - Constructor for class io.github.robolib.module.actuator.Solenoid

SOLENOID_OFF - Static variable in class io.github.robolib.module.actuator.SolenoidBase

The Constant kSolenoidOff.

SOLENOID_ON - Static variable in class io.github.robolib.module.actuator.SolenoidBase

The Constant kSolenoidOn.

SolenoidBase - Class in io.github.robolib.module.actuator

The Class SolenoidBase.

SolenoidBase() - Constructor for class io.github.robolib.module.actuator.SolenoidBase

SolenoidBase.SolenoidChannel - Enum in io.github.robolib.module.actuator

The Enum Channel.

SolenoidBase.Value - Enum in io.github.robolib.module.actuator

The Enum Value.

SolenoidChannel() - Constructor for enum io.github.robolib.module.actuator.SolenoidBase.SolenoidChannel

SolenoidJNI - Class in io.github.robolib.jni

SolenoidJNI() - Constructor for class io.github.robolib.jni.SolenoidJNI

SolenoidMapper - Class in io.github.robolib.util.mapper

SolenoidMapper() - Constructor for class io.github.robolib.util.mapper.SolenoidMapper

Source - Interface in io.github.robolib.identifier

Represents an object that provides a value.

sourcePoints - Variable in class com.ni.vision.NIVision.ExtractContourReport

sourcePoints_buf - Variable in class com.ni.vision.NIVision.ExtractContourReport

SourceType() - Constructor for enum io.github.robolib.module.sensor.Counter.SourceType

spacingOptions - Variable in class com.ni.vision.NIVision.ReadOCRFileResult

SpeedController - Interface in io.github.robolib.module.controller

The Interface SpeedController.

SpeedControllerMapper - Class in io.github.robolib.util.mapper

SpeedControllerMapper() - Constructor for class io.github.robolib.util.mapper.SpeedControllerMapper

SpeedSink - Interface in io.github.robolib.identifier

SpeedSource - Interface in io.github.robolib.identifier

SPI - Class in io.github.robolib.module.iface

SPI bus interface class.

SPI(SPI.Port) - Constructor for class io.github.robolib.module.iface.SPI

Constructor

SPI.Port - Enum in io.github.robolib.module.iface

Valid SPI ports on the RIO

SPI_READ_NO_DATA - Static variable in class io.github.robolib.jni.HALLibrary

native declaration : AthenaJava\target\native\include\HAL\Errors.h

SPI_READ_NO_DATA_MESSAGE - Static variable in class io.github.robolib.jni.HALLibrary

native declaration : AthenaJava\target\native\include\HAL\Errors.h

SPI_READ_NO_MISO - Static variable in class io.github.robolib.jni.HALLibrary

native declaration : AthenaJava\target\native\include\HAL\Errors.h

SPI_READ_NO_MISO_MESSAGE - Static variable in class io.github.robolib.jni.HALLibrary

native declaration : AthenaJava\target\native\include\HAL\Errors.h

SPI_WRITE_NO_MOSI - Static variable in class io.github.robolib.jni.HALLibrary

native declaration : AthenaJava\target\native\include\HAL\Errors.h

SPI_WRITE_NO_MOSI_MESSAGE - Static variable in class io.github.robolib.jni.HALLibrary

native declaration : AthenaJava\target\native\include\HAL\Errors.h

spiClose(byte) - Static method in class io.github.robolib.jni.SPIJNI

spiInitialize(byte, IntBuffer) - Static method in class io.github.robolib.jni.SPIJNI

SPIJNI - Class in io.github.robolib.jni

SPIJNI() - Constructor for class io.github.robolib.jni.SPIJNI

spiRead(byte, ByteBuffer, byte) - Static method in class io.github.robolib.jni.SPIJNI

spiSetBitsPerWord(byte, byte) - Static method in class io.github.robolib.jni.SPIJNI

spiSetChipSelectActiveHigh(byte, IntBuffer) - Static method in class io.github.robolib.jni.SPIJNI

spiSetChipSelectActiveLow(byte, IntBuffer) - Static method in class io.github.robolib.jni.SPIJNI

spiSetOpts(byte, int, int, int) - Static method in class io.github.robolib.jni.SPIJNI

spiSetSpeed(byte, int) - Static method in class io.github.robolib.jni.SPIJNI

spiTransaction(byte, ByteBuffer, ByteBuffer, byte) - Static method in class io.github.robolib.jni.SPIJNI

spiWrite(byte, ByteBuffer, byte) - Static method in class io.github.robolib.jni.SPIJNI

Spoke2Result(ByteBuffer) - Constructor for class com.ni.vision.NIVision.Spoke2Result

SpokeDirection(int) - Constructor for enum com.ni.vision.NIVision.SpokeDirection

spokeLines - Variable in class com.ni.vision.NIVision.SpokeReport

spokeLines_buf - Variable in class com.ni.vision.NIVision.SpokeReport

SpokeOptions() - Constructor for class com.ni.vision.NIVision.SpokeOptions

SpokeOptions(int, int, int, double, NIVision.InterpolationMethod, int) - Constructor for class com.ni.vision.NIVision.SpokeOptions

SpokeOptions(ByteBuffer, int) - Constructor for class com.ni.vision.NIVision.SpokeOptions

SpokeOptions(long, boolean) - Constructor for class com.ni.vision.NIVision.SpokeOptions

SpokeReport() - Constructor for class com.ni.vision.NIVision.SpokeReport

SpokeReport(NIVision.LineFloat[], NIVision.PointFloat[], NIVision.PointFloat[], NIVision.EdgeLocationReport[], int[]) - Constructor for class com.ni.vision.NIVision.SpokeReport

SpokeReport(ByteBuffer, int) - Constructor for class com.ni.vision.NIVision.SpokeReport

SpokeReport(long, boolean) - Constructor for class com.ni.vision.NIVision.SpokeReport

SpokeReport2() - Constructor for class com.ni.vision.NIVision.SpokeReport2

SpokeReport2(NIVision.EdgeInfo[], NIVision.EdgeInfo[], NIVision.SearchLineInfo[]) - Constructor for class com.ni.vision.NIVision.SpokeReport2

SpokeReport2(ByteBuffer, int) - Constructor for class com.ni.vision.NIVision.SpokeReport2

SpokeReport2(long, boolean) - Constructor for class com.ni.vision.NIVision.SpokeReport2

sqrt2 - Static variable in class io.github.robolib.module.actuator.DriveBase

squareInput(double) - Static method in class io.github.robolib.module.actuator.DriveBase

Square an input, keeping the sign(-/+)

squareSign(double) - Static method in class io.github.robolib.util.MathUtils

standardDeviation - Variable in class com.ni.vision.NIVision.ErrorStatistics

standardDeviation - Variable in class com.ni.vision.NIVision.NearestNeighborClassResult

start - Variable in class com.ni.vision.NIVision.BestLine

start - Variable in class com.ni.vision.NIVision.EdgePolarity

start - Variable in class com.ni.vision.NIVision.HistogramReport

start - Variable in class com.ni.vision.NIVision.Line

start - Variable in class com.ni.vision.NIVision.LineFloat

start - Variable in class com.ni.vision.NIVision.PointDoublePair

start() - Method in class io.github.robolib.command.Command

Start.

start() - Method in class io.github.robolib.nettable.NTServer

Start the monitor thread

start() - Method in class io.github.robolib.nettable.NTWriteManager

start the write thread

startAngle - Variable in class com.ni.vision.NIVision.Annulus

startAngle - Variable in class com.ni.vision.NIVision.ArcInfo

startAngle - Variable in class com.ni.vision.NIVision.ArcInfo2

startAngle - Variable in class com.ni.vision.NIVision.ConstCurveFeature

startAngle - Variable in class com.ni.vision.NIVision.PartialCircle

startAngle - Variable in class com.ni.vision.NIVision.PartialEllipse

StartCommand - Class in io.github.robolib.command

A StartCommand will call the start() method of another command when it is initialized and will finish immediately.

StartCommand(Command) - Constructor for class io.github.robolib.command.StartCommand

Instantiates a StartCommand which will start the given command whenever its initialize() is called.

startLiveWindowMode() - Method in interface io.github.robolib.identifier.LiveWindowSendable

startLiveWindowMode() - Method in class io.github.robolib.module.actuator.CANJaguar

startLiveWindowMode() - Method in class io.github.robolib.module.actuator.DoubleSolenoid

startLiveWindowMode() - Method in class io.github.robolib.module.actuator.Solenoid

startLiveWindowMode() - Method in class io.github.robolib.module.controller.PIDController

startLiveWindowMode() - Method in class io.github.robolib.module.iface.AnalogInput

Analog Channels don't have to do anything special when entering the LiveWindow.

startLiveWindowMode() - Method in class io.github.robolib.module.iface.AnalogOutput

Analog Channels don't have to do anything special when entering the LiveWindow.

startLiveWindowMode() - Method in class io.github.robolib.module.iface.PWM

startLiveWindowMode() - Method in interface io.github.robolib.module.sensor.ADXL345

startLiveWindowMode() - Method in class io.github.robolib.module.sensor.ADXL345_I2C

startLiveWindowMode() - Method in class io.github.robolib.module.sensor.ADXL345_SPI

startLiveWindowMode() - Method in class io.github.robolib.module.sensor.HMC5883L

startLiveWindowMode() - Method in class io.github.robolib.module.sensor.InternalAccelerometer

startPoint - Variable in class com.ni.vision.NIVision.LineFeature

startPoint - Variable in class com.ni.vision.NIVision.LineMatch

startPt - Variable in class com.ni.vision.NIVision.FindConcentricEdgeReport

startPtCalibrated - Variable in class com.ni.vision.NIVision.FindConcentricEdgeReport

startRunning() - Method in class io.github.robolib.command.Command

Start running.

startThread() - Method in class io.github.robolib.DriverStation

startTiming() - Method in class io.github.robolib.command.Command

Start timing.

StateMachine - Interface in io.github.robolib.util

StationID() - Constructor for enum io.github.robolib.RoboLib.StationID

StatusFrameRate(int) - Constructor for enum io.github.robolib.module.actuator.CANTalon.StatusFrameRate

stdDev - Variable in class com.ni.vision.NIVision.HistogramReport

stdDev - Variable in class com.ni.vision.NIVision.LineProfile

stdDev - Variable in class com.ni.vision.NIVision.QuantifyData

steepness - Variable in class com.ni.vision.NIVision.EdgeOptions

steepness - Variable in class com.ni.vision.NIVision.RakeOptions

steepness - Variable in class com.ni.vision.NIVision.SpokeOptions

stepSize - Variable in class com.ni.vision.NIVision.CircleFitOptions

stepSize - Variable in class com.ni.vision.NIVision.ColorSegmenationOptions

stepSize - Variable in class com.ni.vision.NIVision.ConcentricEdgeFitOptions

stepSize - Variable in class com.ni.vision.NIVision.StraightEdgeOptions

stepSize - Variable in class com.ni.vision.NIVision.WindowSize

stepX - Variable in class com.ni.vision.NIVision.ImageInfo

stepY - Variable in class com.ni.vision.NIVision.ImageInfo

stop() - Method in class io.github.robolib.nettable.NTServer

Stop the monitor thread

stop() - Method in class io.github.robolib.nettable.NTThread

stop() - Method in class io.github.robolib.nettable.NTWriteManager

stop the write thread

StopBits(int) - Constructor for enum io.github.robolib.module.iface.Serial.StopBits

stopLiveWindowMode() - Method in interface io.github.robolib.identifier.LiveWindowSendable

stopLiveWindowMode() - Method in class io.github.robolib.module.actuator.CANJaguar

stopLiveWindowMode() - Method in class io.github.robolib.module.actuator.DoubleSolenoid

stopLiveWindowMode() - Method in class io.github.robolib.module.actuator.Solenoid

stopLiveWindowMode() - Method in class io.github.robolib.module.controller.PIDController

stopLiveWindowMode() - Method in class io.github.robolib.module.iface.AnalogInput

Analog Channels don't have to do anything special when exiting the LiveWindow.

stopLiveWindowMode() - Method in class io.github.robolib.module.iface.AnalogOutput

Analog Channels don't have to do anything special when exiting the LiveWindow.

stopLiveWindowMode() - Method in class io.github.robolib.module.iface.PWM

stopLiveWindowMode() - Method in interface io.github.robolib.module.sensor.ADXL345

stopLiveWindowMode() - Method in class io.github.robolib.module.sensor.ADXL345_I2C

stopLiveWindowMode() - Method in class io.github.robolib.module.sensor.ADXL345_SPI

stopLiveWindowMode() - Method in class io.github.robolib.module.sensor.HMC5883L

stopLiveWindowMode() - Method in class io.github.robolib.module.sensor.InternalAccelerometer

stopMotor() - Method in class io.github.robolib.module.actuator.CANJaguar

Stop/Disable the motor.

stopMotor() - Method in class io.github.robolib.module.actuator.CANTalon

Common interface for stopping a motor.

stopMotor() - Method in class io.github.robolib.module.actuator.DriveBase

Stop motor.

stopMotor() - Method in class io.github.robolib.module.controller.LimitedController

Stop/Disable the motor.

stopMotor() - Method in class io.github.robolib.module.controller.NullController

Do Nothing

stopMotor() - Method in class io.github.robolib.module.controller.PWMController

Stop/Disable the motor.

stopMotor() - Method in interface io.github.robolib.module.controller.SpeedController

Stop/Disable the motor.

stopMotor() - Method in interface io.github.robolib.module.MotorSafety

Stop motor.

StraightEdge() - Constructor for class com.ni.vision.NIVision.StraightEdge

StraightEdge(NIVision.LineFloat, NIVision.LineFloat, double, double, double, double, double, int, NIVision.EdgeInfo[]) - Constructor for class com.ni.vision.NIVision.StraightEdge

StraightEdge(ByteBuffer, int) - Constructor for class com.ni.vision.NIVision.StraightEdge

StraightEdge(long, boolean) - Constructor for class com.ni.vision.NIVision.StraightEdge

straightEdgeCoordinates - Variable in class com.ni.vision.NIVision.StraightEdge

StraightEdgeOptions() - Constructor for class com.ni.vision.NIVision.StraightEdgeOptions

StraightEdgeOptions(int, NIVision.StraightEdgeSearchMode, double, double, double, double, double, int, double, double, int) - Constructor for class com.ni.vision.NIVision.StraightEdgeOptions

StraightEdgeOptions(ByteBuffer, int) - Constructor for class com.ni.vision.NIVision.StraightEdgeOptions

StraightEdgeOptions(long, boolean) - Constructor for class com.ni.vision.NIVision.StraightEdgeOptions

StraightEdgeReport2() - Constructor for class com.ni.vision.NIVision.StraightEdgeReport2

StraightEdgeReport2(NIVision.StraightEdge[], NIVision.SearchLineInfo[]) - Constructor for class com.ni.vision.NIVision.StraightEdgeReport2

StraightEdgeReport2(ByteBuffer, int) - Constructor for class com.ni.vision.NIVision.StraightEdgeReport2

StraightEdgeReport2(long, boolean) - Constructor for class com.ni.vision.NIVision.StraightEdgeReport2

straightEdges - Variable in class com.ni.vision.NIVision.FindEdgeReport

straightEdges - Variable in class com.ni.vision.NIVision.StraightEdgeReport2

straightEdges_buf - Variable in class com.ni.vision.NIVision.FindEdgeReport

straightEdges_buf - Variable in class com.ni.vision.NIVision.StraightEdgeReport2

StraightEdgeSearchMode(int) - Constructor for enum com.ni.vision.NIVision.StraightEdgeSearchMode

straightness - Variable in class com.ni.vision.NIVision.FindConcentricEdgeReport

straightness - Variable in class com.ni.vision.NIVision.StraightEdge

strategy - Variable in class com.ni.vision.NIVision.MatchColorPatternOptions

streamMode - Variable in class com.ni.vision.NIVision.QRCodeReport

strikeout - Variable in class com.ni.vision.NIVision.DrawTextOptions

strikeout - Variable in class com.ni.vision.NIVision.OverlayTextOptions

STRING - Static variable in class io.github.robolib.nettable.entry.NTEntryTypes

a string type

STRING_ARRAY_RAW_ID - Static variable in class io.github.robolib.nettable.entry.StringArray

STRING_RAW_ID - Static variable in class io.github.robolib.nettable.entry.NTEntryTypes

StringArray - Class in io.github.robolib.nettable.entry

StringArray() - Constructor for class io.github.robolib.nettable.entry.StringArray

stringToValue(String) - Static method in class org.json.JSONObject

Try to convert a string into a number, boolean, or null.

StringUtils - Class in io.github.robolib.util

StringUtils() - Constructor for class io.github.robolib.util.StringUtils

StructuringElement() - Constructor for class com.ni.vision.NIVision.StructuringElement

StructuringElement(int, int, int) - Constructor for class com.ni.vision.NIVision.StructuringElement

StructuringElement(ByteBuffer, int) - Constructor for class com.ni.vision.NIVision.StructuringElement

StructuringElement(long, boolean) - Constructor for class com.ni.vision.NIVision.StructuringElement

style - Variable in class com.ni.vision.NIVision.BrowserOptions

subpixel - Variable in class com.ni.vision.NIVision.CurveParameters

subpixel - Variable in class com.ni.vision.NIVision.SimpleEdgeOptions

subpixelAccuracy - Variable in class com.ni.vision.NIVision.CurveOptions

subpixelAccuracy - Variable in class com.ni.vision.NIVision.MatchColorPatternOptions

subpixelAccuracy - Variable in class com.ni.vision.NIVision.MatchGeometricPatternOptions

subpixelAccuracy - Variable in class com.ni.vision.NIVision.MatchPatternOptions

subpixelDivisions - Variable in class com.ni.vision.NIVision.EdgeOptions

subpixelDivisions - Variable in class com.ni.vision.NIVision.RakeOptions

subpixelDivisions - Variable in class com.ni.vision.NIVision.SpokeOptions

subpixelIterations - Variable in class com.ni.vision.NIVision.MatchGeometricPatternAdvancedOptions

subpixelIterations - Variable in class com.ni.vision.NIVision.MatchGeometricPatternAdvancedOptions2

subpixelIterations - Variable in class com.ni.vision.NIVision.MatchGeometricPatternAdvancedOptions3

subpixelIterations - Variable in class com.ni.vision.NIVision.MatchPatternAdvancedOptions

subpixelMatchFactor - Variable in class com.ni.vision.NIVision.MatchGeometricPatternAdvancedOptions3

subpixelSampleSize - Variable in class com.ni.vision.NIVision.LearnPatternAdvancedRotationOptions

subpixelSampleSize - Variable in class com.ni.vision.NIVision.LearnPatternAdvancedShiftOptions

subpixelSampleSizeFactor - Variable in class com.ni.vision.NIVision.LearnPatternAdvancedRotationOptions

subpixelSampleSizeFactor - Variable in class com.ni.vision.NIVision.LearnPatternAdvancedShiftOptions

subpixelTolerance - Variable in class com.ni.vision.NIVision.MatchGeometricPatternAdvancedOptions

subpixelTolerance - Variable in class com.ni.vision.NIVision.MatchGeometricPatternAdvancedOptions2

subpixelTolerance - Variable in class com.ni.vision.NIVision.MatchGeometricPatternAdvancedOptions3

subpixelTolerance - Variable in class com.ni.vision.NIVision.MatchPatternAdvancedOptions

subpixelType - Variable in class com.ni.vision.NIVision.EdgeOptions

subpixelType - Variable in class com.ni.vision.NIVision.RakeOptions

subpixelType - Variable in class com.ni.vision.NIVision.SpokeOptions

subsamplingRatio - Variable in class com.ni.vision.NIVision.RakeOptions

subsamplingRatio - Variable in class com.ni.vision.NIVision.SpokeOptions

substitutionChar - Variable in class com.ni.vision.NIVision.ReadTextOptions

Subsystem - Class in io.github.robolib.command

The Class Subsystem.

Subsystem(String) - Constructor for class io.github.robolib.command.Subsystem

Instantiates a new subsystem.

Subsystem() - Constructor for class io.github.robolib.command.Subsystem

Instantiates a new subsystem.

subtype - Variable in class com.ni.vision.NIVision.DataMatrixOptions

SupervisedColorSegmentationReport() - Constructor for class com.ni.vision.NIVision.SupervisedColorSegmentationReport

SupervisedColorSegmentationReport(NIVision.ROILabel[]) - Constructor for class com.ni.vision.NIVision.SupervisedColorSegmentationReport

SupervisedColorSegmentationReport(ByteBuffer, int) - Constructor for class com.ni.vision.NIVision.SupervisedColorSegmentationReport

SupervisedColorSegmentationReport(long, boolean) - Constructor for class com.ni.vision.NIVision.SupervisedColorSegmentationReport

swap16(int, byte[]) - Static method in class io.github.robolib.module.actuator.CANJaguar

we are on ARM-LE now, not Freescale so no need to swap

swap32(int, byte[]) - Static method in class io.github.robolib.module.actuator.CANJaguar

swigCMemOwn - Variable in class io.github.robolib.jni.CtreCanNode

swigCPtr - Variable in class io.github.robolib.jni.CanTalonSRX

swigCPtr - Variable in class io.github.robolib.jni.CtreCanNode

swigCPtr - Variable in class io.github.robolib.jni.SWIGTYPE_Adapter

swigName - Variable in class io.github.robolib.jni.CanTalonSRX.param_t

swigNext - Static variable in class io.github.robolib.jni.CanTalonSRX.param_t

swigToEnum(int) - Static method in class io.github.robolib.jni.CanTalonSRX.param_t

SWIGTYPE_Adapter - Class in io.github.robolib.jni

SWIGTYPE_Adapter(long, boolean) - Constructor for class io.github.robolib.jni.SWIGTYPE_Adapter

SWIGTYPE_Adapter() - Constructor for class io.github.robolib.jni.SWIGTYPE_Adapter

swigValue - Variable in class io.github.robolib.jni.CanTalonSRX.param_t

swigValue() - Method in class io.github.robolib.jni.CanTalonSRX.param_t

swigValues - Static variable in class io.github.robolib.jni.CanTalonSRX.param_t

switchSPIEnabled(boolean) - Method in class io.github.robolib.module.sensor.mpu6050.MPU6050

Switch from I2C to SPI mode (MPU-6000 only) If this is set, the primary SPI interface will be enabled in place of the disabled primary I2C interface.

SwitchType(boolean) - Constructor for enum io.github.robolib.module.sensor.LimitSwitch.SwitchType

Instantiates a new e switch type.

symbolContrast - Variable in class com.ni.vision.NIVision.AIMGradeReport

symbolContrastGrade - Variable in class com.ni.vision.NIVision.AIMGradeReport

SymmetryBehavior - Variable in class com.ni.vision.NIVision.TransformBehaviors

syntaxError(String) - Method in class org.json.JSONTokener

Make a JSONException to signal a syntax error.

SYS_STATUS_DATA_SIZE - Static variable in class io.github.robolib.jni.NetworkCommunications

system - Variable in class com.ni.vision.NIVision.CalibrationInfo

SYSTEM_CLOCK_TICKS_PER_MICROSEC - Static variable in class io.github.robolib.module.iface.PWM

SystemMonitor - Class in io.github.robolib

SystemMonitor() - Constructor for class io.github.robolib.SystemMonitor

SystemType() - Constructor for enum io.github.robolib.module.LimitSystem.SystemType

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z _